K2984 Infinite FX Foil Adhesive

K2984 Infinite FX Foil Adhesive - 1 Gallon


Regular price $250.00 CAD
Regular price Sale price $250.00 CAD
Sale Sold out
Shipping calculated at checkout.

Wilflex K2984 INFINITE FX FOIL ADHESIVE is formulated as a press-ready plastisol for printing on 100% Cotton fabrics or over a low bleed underlay on poly/cotton. This product is ideal for flock, heat transfer flock, foils, as well as other media.


In stock


Product Resources

View full details

Often Purchased With

Additional Information

  • K2984 INFINITE FX FOIL ADHESIVE has excellent adhesion qualities. Can be used on most textile fabrics where a printable adhesive is needed.
  • Great for adhering fabric layers together when gluing fabric patches onto garments.
  • Functions as an adhesive for Foil, Transfers, Caviar Beads, Sequins, etc

Fabric Types

  • Other



  • Counts: 86
  • Tension: 18n-25n/cm3



  • Durometer: 70,80
  • Profile: Square
  • Stroke: 1+
  • Angle: 10-15%



  • Standard Emulsion
  • Off Contact: 1/16” (2mm) or greater
  • Emulsion Over Mesh: 15-20%


Flash & Cure Temperatures

  • Flash: 140-150°F on pre-heated pallets
  • Cure: 320°F (160°C)


Pigment Loading

  • N/A



  • N/A


Shipping & Storage

  • 65-90°F (18-32°C)
  • Avoid direct sunlight.
  • Use within one year of receipt


Clean Up

  • Unused ink will need to be disposed of responsibly. Standard plastisol cleaners, press wash, or ink degradant
  • Great for adhering fabric layers together when gluing fabric patches onto garments. requires stirring before printing.
  • Print K2984 INFINITE FX FOIL ADHESIVE directly onto substrates or over an underlay.
  • K2984 INFINITE FX FOIL ADHESIVE is normally printed through 86 t/in (34 t/cm) mesh for maximum lay down. Recommend soft squeegee. Suggest printing through 200 micron stencil for maximum film thickness to provide maximum adhesion to the substrate.
  • For heat transfers temperatures, times, and pressures- refer to the tech sheet for transfer product.
  • Stir plastisols before printing.
  • Do not dry clean, bleach or iron printed area.
  • Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion and unacceptable durability. Gel and cure temperatures for ink should be measured using a Thermoprobe device placed directly in the wet ink film and verified on the substrate(s) and equipment to be used for production.
  • It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet the printer’s customer standards or specifications.
  • Curing is the responsibility of each printer to confirm that the print is fully cured. PolyOne’s cure recommendations are not a guarantee or warranty, but merely suggested starting points for curing evaluations as explained above.
  • When printing on garments that contain certain dyes, you must pre-test for the potential ghosting. Please refer to our website for more information on this issue.
  • Wilflex products have been carefully designed to perform within a given viscosity range, and any dramatic change in viscosity is probable to result in a change in printing characteristics
  • NON-CONTAMINATION OF EPIC INKS: Do not mix EPIC inks with inks, additives or extenders from other companies. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.
  • Any application not referred in this product information bulletin should be pre-tested or consultation sought with Wilflex Technical Services Department prior to printing.