Mister-T2 Pro Pretreatment Machine
Mister-T2 Pro Pretreatment Machine - Without Table
Mister T2 Pro is an advanced pretreat spray machine with hassle-free dual nozzles cleaning and an anti-clogging wet cap. With a smooth and precise spray of this machine, you can get quality prints with consistent outcomes. The Mister-T2 is compact and lightweight, so you will be able to move it around and work with limited space. It comes with a Step Pedal to trigger the pretreat spray.
Made of aluminum and stainless steel, the machine remains rust-free and can be easily maintained because of its top open design. With a laser pre-scanning the spraying area, easy drainage, space for thick garments like hoodies, ventilation fan, and multi-inlet selector valves that allow you to easily switch from pretreatment liquid to water, this machine is perfect for any Direct-to-Garment pretreatment.
Additionally, this machine allows you to save your favorite settings so you can use them again later. With its auto nozzle cleaning, a flushing program, and a capping station, the Mister T-2 Pro's nozzles will not dry or clog after usage.
Mister-T2 Pro can be clean and operated easily without much experience.
Often Purchased With
- 2 Nozzles
- Adjustable Nozzle Angle for complete spraying coverage
- Consistent spraying
- Adjustable Spraying Area
- Preset: Frequent options can be saved and retrieved
- Real-Time Cost Calculation of Liquid for each spraying (Cents)
- Pre-Scanning: Preview the spraying are with a laser.
- Capping Station Protects the nozzles from drying or clogging
- Smart Auto Nozzle Cleaning and Flushing Program: With the machine on, it will automatically purge water every 4 hours to prevent the nozzles from clogging.
- Rust Free Structures and Parts: All Structures and parts are made of Aluminum and Stainless Steel
- Open Top Design for easy maintenance
- LED Light
- Ventilation Fan: The fan is designed to prevent the pretreat mist from getting stuck and clogged in parts of the machine
- Easy Drainage: The front legs are slightly higher than the back legs and also has a slanted basement.
- Enough Space for thick garments like hoodies.
- Multi-Inlet Selector Valves
- Load 12 or more garments at a time onto a spring-applied platen which adjusts the height automatically for a consistent spray.
- Step pedal to trigger the pretreat spray
- Save time and effort with the open layout, which allows for easy and fast load/unloading
- Easy to Switch from pretreat to water
- 12 Months Warranty (1 Year)
- Easy Control Panel
- Nozzle Capping Station
- Multi-Inlet Selector Valves on the Side
- Adjustable Nozzle Angle
- Freely Select the Spraying Area
- Top Cover Open
- Slant Basement
- 16"x 20" (40cm x 50cm) Size Platen
|Dimensions||40 mm (W) x 900 mm (L) x 530 mm ( H)|
|Platen Size||40 cm x 50c m (16 " x 20")|
|Number of Spray Nozzle||Two Nozzle s|
|Maximum Spray Area||40 cm x 50cm (16 " x 20")|
|Spray Cycle Time||3 sec ~ 12 sec|
|Power Supply||Free Voltage (100V~ 240V 50/60hz)|
|Power Consumpt ion||60 W|
|Packing Si ze||670mm (W) x 935 mm (L) x 840mm (H)|
|Packing Weight||46 Kgs|
With Minimum Speed: about 85ml
With Maximum Speed: about 12ml
The Mister Table is the perfect place for your DTG printer, heat press, and pretreatment machine! This table provides a convenient waist-level height for your equipment, can bear a load of up to 500 lbs, includes heavyweight and lockable swivel wheels, and a waste tank holder on the backside for waste ink bottles or pretreatment.
- Dimensions: 25.6" (W) by 33.5" (L) by 33.3" (H)
- Package Size: 31.5" (W) by 40" (L) by 8" (H)
- Weight: 80.5 lbs
- Height Between Shelves: 11.8"
- Assembly Required.
Is the Mister-T2 Pro Pretreatment Machine right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Mister-T2 Pro Pretreatment Machine to your apparel decorating business.