Toyoda
Toyoda Falcon Industrial Fume Extractor Replacement Filter Pack (Charcoal & HEPA)
Toyoda Falcon Industrial Fume Extractor Replacement Filter Pack (Charcoal & HEPA) - Charcoal & HEPA Filter Pack
SKU:
The Toyoda Fume Extractor Filter Pack consists of a Charcoal & HEPA filter. The activated charcoal bag, responsible for trapping odors and impurities in the Toyoda Falcon Fume Extractor, can be effortlessly slid out for examination or replacement. The HEPA filter is designed to provide maximum efficiency, ensuring that the Toyoda Falcon fum extractor consistently delivers clean and fresh air.
We advise checking both the activated charcoal and HEPA filter regularly and replacing them every three months to maintain optimal filtration performance.
In stock
Couldn't load pickup availability
Product Resources
Often Purchased With
-
Toyoda Falcon Industrial Portable Fume Extractor
TC-TOYODA-FERegular price $2,800.00 CADRegular priceUnit price per
Additional Information
The process starts with a DTF printer laying down specialized inks onto special plastic PET films. These films are known as DTF Transfer Films. Then, DTF hot-melt adhesive powder, a white granular product, is applied to the printed transfer film. The powder is evenly applied to the film with a powder shaker. The powder only sticks to the areas that have ink on them. The powder shaker literally shakes off the excess powder off the film. The film is then transported into a small curing oven that is used to melt and bind the hot melt powder onto the transfer film. The hot-melt adhesive does not actually release fumes at this stage because of the nature of the thermoplastic adhesives used.
However, the oven boils away the excess liquid from the inks and creates a fog. The dense, oily fog is made up of a concentration of tiny liquid droplets. This is where fume extraction is required. The HEPA and Charcoal filters are specifically designed to capture these microscopic droplets. This is necessary to keep the work environment, product and equipment clean and fog-free.
Once the transfer film is complete with ink and adhesive layers applied and oven cured, a Heat Press is used to transfer the designed embellishment onto fabric or garment without any additional release of fumes.
WORK IN A WELL VENTILATED AREA and use Protective Equipment when working with DTF products and processes as fumes may be hazardous. DTF inks and film require a good humidity environment - over 40% humidity is highly recommended to minimize risk of ink clogs and film buckling.