Tajima TFMX-IIC Type 2 (Multi Head Embroidery Machine)

Tajima TFMX-IIC Type 2 (Multi Head Embroidery Machine) - 2 Head - Stretch


Financing Options


The Tajima TFMX-IIC Type 2 multi head commercial embroidery machine provides a large work area for bulky items. The larger machine footprint makes the machine a great candidate for options such as the Single Head Laser, Sequins, Lockrose, Cording and more.

Configuration Options
View full details


Head interval refers to the space from one head to the exact same location on the adjacent head. We use the term "standard" for machines that have a 360mm (14 inch) head interval and the term "stretch" for machines that have a 500mm (19.6 inch) head interval.



    Standard 360 MM Head Interval


    The standard 360mm (14 inch) head interval machines are ideal for producing a standard mix of products that are not limited to caps, shirts, sweatshirts, jacket backs, and infinitely more.



    Stretch 500 MM Head Interval


    The stretch 500 mm (19.6 inch) head interval provides more space between heads which makes it easier to accommodate larger, bulky products such as sweatshirts, jackets, blankets, etc. This setup is ideal for customers who do a larger percentage of these types of items and can accommodate the larger machine size.

  • Safety Beam Sensor
    Safety Beam Sensor

    A beam surrounds the work area while machine is in motion. If the plane is broken the machine will immediately stop.

  • Slim Cylinder
    Slim Cylinder

    Slim Cylinder makes it possible to embroider on smaller products such as socks, gloves, and pockets. 

  • Cap Driver
    Cap Driver

    The cap driver incorporates a lower shaft and a third locking pin to stabilize the cap during embroidery to enhance quality, and run at higher speeds.

  • Thread Locking
    Thread Locking

    The Thread Locking System secures the thread after a trim to help prevent the thread pulling out during needle startup.

  • Trimmed Needle Plate
    Trimmed Needle Plate

    A shorter distance between the needle hole and the edge of the trimmed needle plate offers an increased embroidery area on many items.

  • Thread Break Detection
    Thread Break Detection

    A sensor monitors the thread movement while stitching.  If the tension on the upper or lower thread is broken the machine stops stitching relaying an error on the controller.

  • LED Needle Base Light
    LED Needle Base Light

    The LED Needle Base Light illuminates the needle area and provides the operator a better view of the item being embroidered.

  • Steeper Head Tilt
    Steeper Head Tilt

    The Steeper Tilt Head angles the bill of a cap more which allows stitching closer to the bill and increases the embroidery area.


Frames Included

Additional Information

The most advanced and reliable high-tech function and mechanisms

  • User-friendly quiet operation

    • The latest noise reduction developments help create a quiet and pleasant working environment for operations


    • The standard memory is 2,000,000 stitches and able to store a max of 200 designs

    Condition memory

    • Stitch conditions can be memorized together with embroidery data. The saved stitch conditions are applicable to job repeat or other machines.

    Scale up/down. Rotate

    • You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1- degree increments.

    Automatic repeat

    • A design can be automatically repeated up to 99 times both vertically and horizontally.

    Design editing

    • Modify, insert or delete your embroidery design data stitch by stitch.

    Satin stitch reduction and expansion

    • Increase or decrease actual stitch length according to the stitch length in a design.

    Clean-up function

    • A very helpful function to automatically remove small stitches to prevent thread breakage as well as to improve production efficiency.

  • Frame back / forward

    • Frame back/forward is available in units of 1, 2 or 3 stitches, stop codes or designated stitch count.


    • Production efficiency has been improved by decreasing downtime caused by color changes, thread trimming etc.

    Origin return

    • The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.

    Trace function

    • Confirm whether or not a design will fit in a frame before embroidery.

    Automatic offset / manual offset

    • Facilitate applique fabric placement and frame changing.

    Automatic upper/under thread trimming device ATH

    • Automatically operates to trim threads by commands in a design data.

    Power failure control measures

    • You can continue to operate the machine even after an unexpected power failure during embroidery without being annoyed by a production error due to design displacement.


Additional Features

  • Auto Color Change

    • Auto needle bar change on color changes within the designs.

    Auto Thread Break Sensor

    • Machine will automatically sense any change in tension with upper thread break or snag.

    Auto Thread Trim

    • Trimmer within needle plate is auto within all trims within a design

    Barcode Ready

    • All machine equipped with multiple USB ports for easy use of any USB style barcode reader

    Color LCD Panel

    • Color LCD panel allows for easy navigation

    Cubical Frame Design

    • A large 14.2" x 19.7" sewing field lets Tajima Embroidery Machines take on the big jobs! Full backs and fronts are no problem.

    High Speed Rotary Hook

    • The rotary hook ensures stable stitching at high production speeds; thereby minimizing thread breaks while balanced thread tension.


  • LAN Enabled

    • Tajima Embroidery Machines are LAN enabled to connect with your network.   Easily transmit designs and improve workflow.

    Quick Frame Changeover

    • Easily switch from caps to tubular to flats to cylinder sewing.

    Safety Beam Sensor

    • An invisible beam of light surrounds the work area of the machine while sewing. Breaking the beam stops the machine

    Picker-Free Embroidery

    • Picker has been eliminated to cut down on bird's nests ensuring deduction in product loss

    USB Enabled

    • Data can be transferred to the controller via USB Flash Drive or LAN machine connection.

    Trimmed Needle Plate

    • A shorter distance between the needle hole and the edge of the trimmed needle plate offers an increased embroidery area on many items.

Model TFMX-IIC Type 2
Needles 15
Factory Options Jumbo Rotary Hook, Sequin Device III Twin Type, Sequin Device IV, Lochrose Embroidery Device, Air Type Clamp Frame, Air Type Pocket Frame, Auto Clamp Frame, Position Marker, LED Light, Beam Sensor
Options High-Speed Cording Device, Boring Device II, Stand, EMB Lame Attachment, Wide Cap Frame, Pocket Frame, Cylindrical Frame, Border Frame, Under Thread Winder
Speed Max. 1,000rpm
Electricity Single phase 100V, 200V, 50Hz/60Hz
Power Consumption 260W


No. of Heads Head Interval Cap Tubular Dimension Weight Min. Door Clearance


500 mm

3" x 14.2"

17.3" x 16.5"

73"W x 50" D x 65"H

810 lbs

32" W


500 mm

3" x 14.2"

17.3" x 16.5"

112"W x 50"D x 67"H

1230 lbs

32" W


360 mm / 500 mm

3" x 14.2"

17.3" x 11" / 17.3" x 16.5"

114"W x 50"D x 67"H / 154"W x 50"D x 67"H 

1330 lbs / 1700 lbs

32" W


360 mm /  500 mm

3" x 14.2"

17.3" x 11" / 17.3" x 16.5"

144"W x 54"D x 69"H / 193"W x 54"D x 69"H

1446 lbs / 1899 lbs

32" W

Is the Tajima TFMX-IIC Type 2 (Multi Head Embroidery Machine) right for you?

Enter your info below and a RB Digital sales representative will contact you about adding the Tajima TFMX-IIC Type 2 (Multi Head Embroidery Machine) to your apparel decorating business.