Red Flash Mid-Level Dryer (Flash Cure Unit)
Red Flash Mid-Level Dryer (Flash Cure Unit) - 18" x 18" / 240V / Without Auto Flash
High-output infrared flash cure unit with digital controls. Digital temperature control delivers repeatable results, as fan maintains edge-to-edge temperature uniformity and cools the enclosure for safety.
The RedFlash™ series features a low profile head of only 2.75 in. (7 cm), and a cooling fan that keeps the outer surface safe to the touch and forms an air curtain around the perimeter to maintain uniform temperatures for edge-to-edge consistency.
The digital controls offer fine adjustment of heat from zero to 100% for repeatable results, diagnostic indicator lights for simplified monitoring, and a high-capacity solid-state relay for long-term reliable service.
- Digital Heat Control
- Casters Included
- 15-Year Heater Warranty
- 3 Year Bumper to Bumper Warranty
- Head rotates 360°
- User friendly diagnostic pilot lights
- Convenient heavy-duty side handles
- Low profile 2-3/4 in." (7 cm) head height
- Adjustable height
- Low cost maintenance
- Vented heat shield
- Anti-rust treatment on all painted steel
Features And Highlights
15-Year Heater Warranty
Diagnostic indicator lights and fully-adjustable digital heat control with cooling fan
Ultra slim 2.75 in. (7 cm) head height
Temperature (digital), heat shield, head height and level
Air-cooled outer skin, heavy-duty side handles and locking casters
Flashes plastisol in 7 to 10 seconds
High wattage/close coil density heater, cooling fan and air curtain for edge-to-edge uniformity
18 in. (46 cm) square unit with 2,600 watt/240V heater or optional 3,500 watt 240V heater, or 18 x 24 in. (46 x 61 cm) unit with high-output 3,500 watt/240V heater as standard
Add On Options
To add additional options, our service team will contact you after purchase to assist in fully customizing your flash cure unit.
• Rotary Table
• International power cords available
Add an Auto Flash to Your Flash Cure Unit
The AutoFlash upgrade rotates the head of the flash cure unit into place above the pallet with the touch of a foot pedal, and automatically rotates the head away from the pallet after a user-adjustable dwell time has elapsed to prevent burning or under-flashing of garments that occurs when operators become distracted.
All AutoFlash units are now equipped as standard with an HMI (Human-Machine-Interface) to control and display dwell time and direction of head rotation. More visible from a distance than previous controls, it also displays a 'ready' message for the next cycle and improves cycle reaction by responding accurately whether the foot switch is pressed during or following a flash cure cycle.
• The Auto Flash unit features a high-torque DC gear motor and eccentric arm drive that actuates head rotation progressively for smooth starts and stops, and a foot pedal switch with 7 ft (2 m) cord for operator convenience.
• A "Breakaway Detent" feature stops the head from rotating if it encounters an obstacle, maximizing operator safety while minimizing damage to the flash cure head, the Auto-Flash gearbox and/or the screen printing press.
• Easy-to-read HMI display panel
• Powerful DC gear motor
• Selectable clockwise or counterclockwise 95° head rotation
• Eccentric arm drive for smooth start and stop
• 0 to 30 second precision timer
• Foot pedal actuator on 7 foot cord
|Heater Warranty||15 Year||15 Year||15 Year||15 Year||15 Year||15 Year|
|Bumper to Bumper Warranty||3 Year||3 Year||3 Year||3 Year||3 Year||3 Year|
|Heater Size||16” x 16” (41 x 41 cm)||18" x 18" (46 x 46 cm)||18" x 18" (46 x 46 cm)||18" x 24" (46 x 61 cm)||18" x 18" (46 x 46 cm)||18" x 24" (46 x 61 cm)|
|Controls||On/Off Switch||Bi-Metal control w/ adjustment knob||Digital percentage timer||Digital percentage timer||Digital percentage timer||Digital percentage timer|
|Unit Warm Up Time||15 min. (120V) or 10 min. (240V)||20 min. (120V) or 10 min (240V)||6 min.||12 min.||6–10 min||6–10 min|
|Heater Wattage||1625 Watt Heater||1950 (120V) or 2600||2600 or 3500 Watt Heater||3500 Watt Heater||3500 Watt Heater||4300 Watt Heater|
|Electrical Specs* / included plug (Some models require a dedicated line. 50/60 HZ for all units.)||120V/13A/1625W NEMA 5-15P
240V/6.5A/1625W NEMA 6-15-P
|120V/15.6/1950W NEMA 5-20P
240V/11/2600W NEMA 6-15-P
|240V/11A/2600W NEMA 6-15P
240V/16A/3500W NEMA 6-20P
|240V/16A/3500W/ NEMA 6-20P Plug||240V/16A/3500W NEMA 6-20P||240V/22A/4300W/ NEMA 6-30LP (plug optional)|
|Electrical Specs - AutoFlash / included plug||
Shipping Weights and Dimensions
|F-100 (Head and Stand)||39 lbs (18 kg)||23” x 28” x 9” (58 x 71 x 22.9 cm)|
|F-1000 (Head and Stand)||42 lbs (19 kg)||23” x 28” x 9” (58 x 71 x 22.9 cm)|
|RD-18-240 (Head Only)||35 lbs (16 kg)||26" x 29" x 7" (66 x 74 x 18 cm)|
|RD-1824-240 (Head Only)||43 lbs (19.5 kg)||26" x 35" x 8" (66 x 90 x 20 cm)|
|RAD-18-HO (Head Only)||64 lbs (29 kg)||29” x 26” x 15” (74 x 66 x 38 cm)|
|RAD-1824 (Head Only)||74 lbs (35.5 kg)||35” x 29” x 15” (89 x 74 x 38 cm)|
|51 lbs (25 kg)||31" x 22" x 14" (79 x 56 x 36 cm)|
Standard Stand for Manual Flash
|22 lbs (10 kg)||37" x 7" x 3" (94 x 18 x 8 cm)|
Heavy Duty Stand for Manual Flash
|42 lbs (19kg)||30” x 14” x 7” (76 x 35.5 x 18 cm)|
Standard Stand for AutoFlash
|15 lbs (7 kg)||37" x 7" x 3" (94 x 18 x 8 cm)|
Heavy Duty Stand for AutoFlash
|39 lbs (18 kg)||30” x 15” x 11” (76 x 38 x 28 cm)|
- The RD-18-240 flash cure unit uses a NEMA 6-15P plug. Please refer to the image below for reference.
- The RD-1824-240 flash cure unit uses a NEMA 6-20P plug. Please refer to the image below for reference.
Is the Red Flash Mid-Level Dryer (Flash Cure Unit) right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Red Flash Mid-Level Dryer (Flash Cure Unit) to your apparel decorating business.