K2200 Epic Athletic Polywhite

K2200 Epic Athletic Polywhite - 1 Gallon


Regular price $160.00 CAD
Regular price Sale price $160.00 CAD
Sale Sold out
Shipping calculated at checkout.

WILFLEX™ K2200 EPIC ATHLETIC POLY WHITE is a phthalate-free plastisol inkDesigned to print on 100% polyester and polyester blend fabrics. Threw outPolyWhite is specially formulated to provide good resistance tofabric dye migration, opacity and coverage in polyester garments.


In stock


Product Resources

View full details

Additional Information

  • Good opacity and coverage, white bright
  • Good elasticity
  • Extraordinary resistance to fabric dye migration
  • Excellent for vector graphics
  • Exceptional printing on presses manual and automatic

Fabric Types

  • 100% polyester, polyester blends



  • Counts: 86-160 t/in (34-62 t/cm)
  • Tension: 25-35 n/cm



  • Durometer: 60/90/60, 70/90/70, 70
  • Edge: Square, Sharp
  • Stroke: Medium flood, fast stroke
  • Angle: 10-15%
  • *Do not use excess squeegee pressure


Non-Phthalate Stencil

  • Direct: 2 over 2
  • Capillary/Thick Film: N/A
  • Off Contact: 1/16” (.2cm)
  • Emulsion Over Mesh: 15-20%


Flash & Cure Temperatures

  • Flash: 220°F (105°C)
  • Cure: 320°F (160°C)


Pigment Loading

  • EQ: N/A
  • MX: N/A
  • PC: N/A
  • *All percentages listed at % by weight.


Epic Additives

  • Extender: N/A
  • Reducer: Epic Viscosity Buster-1% max
  • *All percentages listed at % by weight


Shipping & Storage

  • 65-90°F (18-32°C)
  • Avoid direct sunlight.
  • Use within one year of receipt


Clean Up

  • Ink degradent or press wash
  • Shake the inks before use
  • Use properly tensioned mesh and edge squeegees rectangular for best printing results.
  • Use a printing technique that ensures a good ink deposit for maximize resistance to fabric dye migration and intensity of movie
  • In difficult fabrics it may be necessary to use a base to control the dye migration from fabric such as K2100 EPIC UBG
  • Adjust the flash temperature and exposure time so that the ink is dry touch. Depending on the flash, a 2 to 3 second flash is adequate.
  • Suitable for use as a base white or as a light white
  • Stir plastisols before printing.
  • Do not dry clean, bleach or iron printed area.
  • Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion and unacceptable durability. Gel and cure temperatures for ink should be measured using a Thermoprobe device placed directly in the wet ink film and verified on the substrate(s) and equipment to be used for production.
  • It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet the printer’s customer standards or specifications.
  • Curing is the responsibility of each printer to confirm that the print is fully cured. PolyOne’s cure recommendations are not a guarantee or warranty, but merely suggested starting points for curing evaluations as explained above.
  • When printing on garments that contain certain dyes, you must pre-test for the potential ghosting. Please refer to our website for more information on this issue.
  • Wilflex products have been carefully designed to perform within a given viscosity range, and any dramatic change in viscosity is probable to result in a change in printing characteristics
  • NON-CONTAMINATION OF EPIC INKS: Do not mix EPIC inks with inks, additives or extenders from other companies. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.
  • Any application not referred in this product information bulletin should be pre-tested or consultation sought with Wilflex Technical Services Department prior to printing.