M&R
HotHead FlatIron Fabric Compression System
HotHead FlatIron Fabric Compression System - Default Title
SKU:
M&R’s Hot Head™ fabric compression system gives garment decorators two ways to apply heat and pressure to fabrics for fiber matting, ink smoothing and other specialty processes. HotHead’s control module mounts on the front of a printhead arm on the press. It uses a multi-function LCD display to set temperature and heater type. The control module works with two heat modules: the HotHead Roller™ applies heat and pressure using a rolling cylinder, and the HotHead FlatIron™ applies heat and pressure by gliding a flat, smooth heating element across the substrate. Each heat module is sold separately.
The HotHead FlatIron is securely affixed to the squeegee mounting bar by two manual squeegee clamps. To ensure optimal performance, two small controllers allow for adjustment of the up/down travel speed of the squeegee chopper bar. M&R chose a military-grade electrical connector, high-cycle flexible wiring, and a long-life flexible sheath to connect the control unit to the heating units.
The HotHead FlatIron uses thermocouples and pre-programmed logic to maintain constant temperatures. The temperature range runs from ambient room temperature to 204o C (400o F). Small cooling fans keep the external skin of the heat modules at a safe operating temperature.
Read more
Read less
The HotHead FlatIron is securely affixed to the squeegee mounting bar by two manual squeegee clamps. To ensure optimal performance, two small controllers allow for adjustment of the up/down travel speed of the squeegee chopper bar. M&R chose a military-grade electrical connector, high-cycle flexible wiring, and a long-life flexible sheath to connect the control unit to the heating units.
The HotHead FlatIron uses thermocouples and pre-programmed logic to maintain constant temperatures. The temperature range runs from ambient room temperature to 204o C (400o F). Small cooling fans keep the external skin of the heat modules at a safe operating temperature.
Product Resources
Features And Highlights
- Offers two ways to apply heat and pressure to fabrics
- Control module mounts on the printhead arm and heat modules attach to squeegee mounting bars
- Military-grade wiring and sheathing ensure long life
Additional Information
HotHead FlatIron 14 |
HotHead Roller 14 |
HotHead FlatIron 18 |
HotHead Roller 18 |
|
| Electrical Requirements | 208/230 V, 1 ph, 9-10 A, 60 HZ, 2 kW | 208/230 V, 1 ph, 9-10 A, 60 HZ, 2 kW | 208/230 V, 1 ph, 11-12 A, 60 HZ, 2.5 kW | 208/230 V, 1 ph, 11-12 A, 60 HZ, 2.5 kW |
| Heat Element Width | 36 cm (14”) | 36 cm (14”) | 46 cm (18”) | 46 cm (18”) |
| Roller Diameter | NA | 5 cm (2”) | NA | 5 cm (2”) |
Is the HotHead FlatIron Fabric Compression System right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the HotHead FlatIron Fabric Compression System to your apparel decorating business.