1 6

Toyoda

Heat Press Curing Tray for DTF Film

Heat Press Curing Tray for DTF Film - Default Title

SKU:

$380.00 CAD
$380.00 CAD
Sale Sold out
Shipping calculated at checkout.

The DTF Cure Tray reduces the time to cure a DTF transfers with a standard 16"x20" clam shell heat press by up to 3 minutes. It allows you to cure/melt DTF powder faster and more evenly within a heat press and is specifically designed for PET transfer curing. Please read how-to instructions below.

 

  • For best results, test your print setting and transfer application beforehand.
  • The consistency of the cured powder can change quickly.
  • Under curing can result in a grainy finish.
  • Over curing can cause pin pricks to appear in the finish.
  • Both under curing and over curing will affect the appearance, and durability of the DTF transfer.

 

Includes:

  • 1 - Cure Tray
  • 1 - 14" x 22" Teflon Sheet

    In stock

    disabled
    View full details

    Often Purchased With

    Additional Information

    STEP 1. 

    Unpackage the DTF Cure-Tray and Teflon Sheet. Make sure both objects are free and clear of any dust or debris.  

    Note: For the best results, the aluminum has been left unfinished and untreated. You may notice small imperfections on the surface of the tray, these should not affect the curing process.  

     

    STEP 2. 

    Set the DTF Cure-Tray onto the heat press platen. Align the tray with the back corners of the platen, (the front edge of the tray will extend beyond the front portion of the heat press platen).

    Step 2

     

    STEP 3. 

    Place the Teflon Sheet overtop the DTF Cure-Tray. The Teflon Sheet should fit inside the walled sides on the tray. 

    Step 3

     

    STEP 4. 

    Arrange the design transfer(s) on top of the Teflon Sheet. Close the press and heat the transfer(s) to the desired time and temperature. (Multiple transfers can be heated at once) 

    Step 4

    Note: To check the transfer, gently guide the Teflon Sheet from the DTF Cure Tray. 

     

    Step 4-2

     

    STEP 5. 

    Once the desired time and temperature have been met, simply remove the design transfer(s) from the heat press.   

    Note: Both the DTF Cure-Tray and the Teflon Sheet have been designed to remain on the heat press platen. 

     

    PRO TIP: FASTER PRODUCTION TIME  

    For faster production time use the Teflon sheet like a cooking tray, guiding the design transfer(s) in and out of the heat press.   Leaving the heat press closed with the Cure-Tray inside, simply guide the Teflon sheet in/out of the press with the design transfer(s) in place. (Make sure the Teflon Sheet is completely level during this process to prevent the design transfer(s) from touching the heat press) 

    • Dimensions & weight: 19.5" x 16"