1 1

Vastex

Econo Red VI Production Infrared Dryer

Econo Red VI Production Infrared Dryer - 30 Inch Belt / 240V / 1 Phase

SKU:

$24,275.00 CAD
$24,275.00 CAD
Sale Sold out
Shipping calculated at checkout.

High Production Infrared Dryers cure screen-printed plastisol, water-based inks, discharge, and/or DTF adhesives at high rates.

 

EconoRed VI dryers are offered in 30, 54 and 78 in. (76, 137 and 198 cm) belt widths to cure standard as well as oversized garments or flat goods screen-printed with plastisol, water-based inks or discharge, as well as DTF adhesive. Fully expandable, these dryers can grow as your needs grow.

 

As with all Vastex conveyor dryers, capacity can be doubled, tripled or quadrupled by adding one, two or three modular heating chambers and conveyor belt extensions — as new or when needs grow.

 

The focused exhaust system evacuates moisture and fumes from the heating chamber and provides excellent air flow to cool the outer skin of the dryer.

 

All heaters feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing, and come with a 15-year warranty.

 

The Vastex Infrared Focusing System allows heater adjustment to any height from 2 to 7 in. (5.1 to 17.8 cm) above the belt, allowing the operator to compensate for bulky garments or hats.

 

All models include a digital belt speed display and a belt tracking system for increased belt life. The digital PID temperature controller is accurate to +/- 1°F (+/-0.5°C), allowing the operator to fine-tune or accurately repeat drying results at any future time.

Belt Width
Volts
Phase
• Special Order
disabled
This product is typically ready for pickup or shipping within one week, subject to lead times provided by manufacturers.
The Econo Red VI Production Infrared Dryer is a special order product that is sourced specifically for you after you place your order. Please note that it may take up to one week for the product to be ready for pickup or shipment, depending on the lead times provided by the manufacturer. After your purchase, we will contact you to confirm the estimated lead times.

Product Resources

View full details

Features And Highlights

 

  • HEAVY DUTY

    "X-Series" Conveyor Belt Tracking System

  • PRECISE

    Digital belt speed display for more accurate control

  • ADJUSTABLE

    2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment

  • ACCURATE

    Digital PID with fuzzy logic — industry's most advanced

  • CONSISTENT

    Heavy duty DC belt speed motor with digital voltage display

  • INNOVATIVE

    Engineered to be shorter and slimmer with high heat and production

  • EXPANDABLE

    Add heat chambers and belt extensions

  

Add On Options
 

To add additional options, our service team will contact you after purchase to assist in fully customizing your dryer.

• Add heating chambers @ 36 in. (91 cm) or 54 in. (137 cm) long
• Belt extensions, front or rear
• 3 Phase and 208, 380, 480 voltages
• Exhaust hood for extra fume extraction
• Hat support rail
• Locking casters for mobility

  

Modular Expandability Allows Your Dryer to Grow With You
 

The capacity (belt speed) of all Vastex floor standing conveyor dryers can be doubled or tripled as new or when needs increase by simply adding one or two modular heating chambers and extending the conveyor belt. This eliminates the need to invest in a larger dryer than you need at the onset, and avoids the high cost of purchasing a new dryer when your needs increase.

 

Cutter

Additional Information

  •  
    ER-VI-30 1 Row
    Plastisol @ 25 secs.** 900+/hr
    Water Based/Discharge @ 70 secs. ** 300+/hr
  •  
    ER-VI-54 2 Rows
    Plastisol @ 25 secs.** 1800+/hr
    Water Based/Discharge @ 70 secs. ** 600+/hr
  •  
    ER-VI-78 3 Rows
    Plastisol @ 25 secs.** 2700+/hr
    Water Based/Discharge @ 70 secs. ** 900+/hr

 

*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

Model ER-VI-30, with 30 in. (76 cm) wide belt and six 24 in. (61 cm) wide heaters (total 15,600 watts) cures up to 900 plastisol-printed garments/h placed in a single row, or 300 garments/h screen-printed with water-based ink or discharge.

 

Model ER-VI-54, with 54 in. (137 cm) wide belt and six 48 in. (122 cm) heaters (total 31,200 watts) cures up to 1,800 plastisol-printed garments/h placed in two rows, or 600 garments/h screen-printed with water-based ink or discharge.

 

Model ER-VI-78, with 78 in. (198 cm) wide belt and six 72 in. (183 cm) heaters (total 46,800 watts) cures up to 2,700 plastisol-printed garments/h placed in three rows, or 900 garments/h screen-printed with water-based ink or discharge.

  ER-II-30 ER-II-54 ER-III-30 ER-III-54 ER-III-78 ER-VI-30 ER-VI-54 ER-VI-78
Heater Warranty 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year
Defect Warranty 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year
Shirts / Hr*
Plastisol @ 25 secs		 300+ 2 Rows - 600+ 450+ 2 Rows - 900+ 3 Rows - 1,350+ 900+ 2 Rows - 1,800+ 3 Rows - 2,700+
Shirts / Hr* - Waterbased/ Discharge 100+ @ 70 secs. 2 Rows - 200+ @ 70 secs. 150+ @ 70 secs. 2 Rows - 300+ @ 70 secs. 3 Rows - 450+ @ 70 secs. 300+ @ 70 secs. 2 Rows - 600+ @ 70 secs. 3 Rows - 900+ @ 70 secs.
Shirts/hr* - DTG/digital N/A N/A N/A N/A N/A N/A N/A N/A
Time in Tunnel Range (mm:ss) 00:11 - 01:39 00:11 - 01:39 00:17 - 02:29 00:17 - 02:29 00:17 - 02:29 00:15 - 03:00 00:15 - 03:00 00:15 - 03:00
Belt Speed 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 3 - 36 FPM (0.9 - 11 MPM) 3 - 36 FPM (0.9 - 11 MPM) 3 - 36 FPM (0.9 - 11 MPM)
Exhaust (Free Air) 380 CFM (10.7 CMM) 380 CFM (10.7 CMM) 380 CFM (10.7 CMM) 550 CFM (15.6 CMM) 700 CFM (19.9 CMM) 2 @ 380 CFM (10.7 CMM) 2 @ 550 CFM (15.6 CMM) 2 @ 700 CFM (19.8 CMM)
Exhaust Stack Diameter 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 2 @ 8” (20.32 cm) 2 @ 8” (20.32 cm) 2 @ 8” (20.32 cm)
Overall Length 87" (221 cm) 87" (221 cm) 105” (267 cm) 105” (267 cm) 105” (267 cm) 159” (404 cm) 159” (404 cm) 159” (404 cm)
Overall Width 45.2" (114.8 cm) 69.2" (175.8 cm) 45.2" (114.8 cm) 69.2" (175.8 cm) 93.2” (236.7 cm) 45.2" (114.8 cm) 69.2" (175.8 cm) 93.2” (236.7 cm)
Overall Height 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm)
Belt Width 30" (76 cm) 54" (137 cm) 30" (76 cm) 54" (137 cm) 78" (404 cm) 30" (76 cm) 54" (137 cm) 78" (404 cm)
Chamber Length 36" (91 cm) 36" (91 cm) 54” (137cm) 54” (137cm) 54” (137cm) 108” (275cm) 108” (275cm) 108” (275cm)
Chamber Infeed Width 34.5" (88 cm) 58.5" (149 cm) 34.5" (88 cm) 58.5" (149 cm) 82.5” (209cm) 34.5" (88 cm) 58.5" (149 cm) 82.5” (209cm)
Chamber Infeed Height (adjustable) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm)
Heat Range (@ Heater) 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V
Heater Size & Standard Wattage** 12" x 24" (30 x 61 cm) 2 @ 3,600 = 7,200 Watts @ 240V

12" x 24" (30 x 61 cm) 2 @ 3,000 = 6,000 Watts @ 380V & 480V		 12" x 48" (30 x 122 cm) 2 @ 7,200 = 14,400 Watts @ 240V

2 @ 6,000 = 12,000 Watts @ 380V & 480V		 12" x 24" (30 x 61 cm) 3 @ 3,600 = 10,800 Watts @ 240V

12" x 24" (30 x 61 cm) 3 @ 3,000 = 9,000 Watts @ 380V & 480V		 12" x 48" (30 x 122 cm) 3 @ 7,200 = 21,600 Watts @ 240V

3 @ 6,000 = 18,000 Watts @ 380V & 480V		 12" x 72" (30 x 183 cm) 3 @ 7,800 = 23,400 Watts @ 240V, 380V, & 480V 12" x 24" (30 x 61 cm) 6 @ 2,600 = 15,600 Watts 240V, 380V, & 480V 12" x 48" (30 x 122 cm) 6 @ 5,200 = 31,200 Watts 240V, 380V, & 480V 12" x 72" (30 x 183 cm) 6 @ 7,800 = 46,800 Watts 240V, 380V, & 480V
Cost / hour to operate
based on 10 cents / kwh		 72 cents @ 240V 60 cents @ 380V & 480V $1.44 @ 240V $1.20 @ 380V & 480V $1.08 @ 240V 90 cents @ 380V & 480V $2.16 @ 240V $1.80 cents @ 380V & 480V $2.34 @ 240V, 380V, & 480V $1.56 @ 240V $3.12 @ 240V $4.68 @ 240V
Standard Wattage 7,200w 14,400w 10,800w 21,600w 23,400w 15,600w 31,200w 46,800w
Shipping Weight*** 665 lbs (302 kg) 1,130 lbs (513 kg) 900 lbs (409 kg) 1,375 lbs (624 kg) Call for details 1 @ 900 lbs (409 kg)
1 @ 755 lbs (343 kg)		 1 @ 1,375 lbs (624 kg)
1 @ 1,325 lbs (601 kg)		 Call for details
Shipping Dimensions*** 61" x 43" x 65" (155 x 110 x 166 cm) 78" x 49" x 65" (199 x 125 x 166 cm) 61" x 61" x 65" (155 x 155 x 166 cm 93" x 65" x 65" (237 x 166 x 166 cm) Call for details 2 @ 61” x 43” x 65” (155 x 110 x 166 cm) 2 @ 93” x 65” x 65” (237 x 166 x 166 cm) Call for details

 

 

Electrical Specs**
All amps listed below are +/- 10%		 ER-II-30 ER-II-54 ER-III-30 ER-III-54 ER-III-78 ER-VI-30 ER-VI-54 ER-VI-78
240V, 1 Phase
3 wire 50/60 HZ		 FLA = 32A FLA = 65A FLA = 50A FLA = 97A FLA = 100A FLA = 68A N/A N/A
240V, 3 Phase
4 wire 50/60 HZ		 FLA = 19A FLA = 37A FLA = 29A FLA = 55A FLA = 60A FLA = 41A FLA = 78A FLA = 117A

 

*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

 

All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.

This dryer does not come with a plug. A plug will need to be added to the supplied pigtail, or the machine will need to be wired direct. We recommend speaking with an electrician if you have any questions.