1 3

Tensorgrip

TensorGrip P310 Canister

TensorGrip P310 Canister - Default Title

SKU:

$535.00 CAD
$535.00 CAD
Sale Sold out
Shipping calculated at checkout.

Previously TensorGrip F90

 

TensorGrip® P310 is a high solids, pressure sensitive adhesive with fast dry, long tack and high peel strength adhesive designed to bond to a vast range of substrates and maintain tackiness.

In stock

disabled

Product Resources

View full details

Often Purchased With

Additional Information

  • Aggressive tack adhesive
  • Fast coverage of large areas
  • Long open assembly time
  • Repositionable
  • One or two sided application
  • 80% of final strength achieved immediately
  • Full strength achieved in 24 hours
  • Also bonds polyethylene and other films
  • Resistant to high temperatures when applied two-sided
  • TensorGrip P310 is designed as a portable, self contained spray system for field or shop applications.
  • Apply adhesive to one or both surfaces to be mated, at 80% to 100% coverage. Spraying both surfaces will result in a stronger, more permanent bond.
  • Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
  • Parts should be mated with as much pressure as practical. Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. 
  • Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
  • Canister system will spray adequately above 60º F. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
  • Notice!!! Do not store at temperatures over 120º F
  • Total Solids: 24-30%
  • VOC Content: 425 g/L
  • Color: Green, Clear; Aerosol Clear Only
  • System Flammability: Non-Flammable adhesive; Flammable propellant
  • Solvent System: Methylene Chloride
  • Dry time: 2-4 mins dependent on temp & humidity
  • Open time: Long
  • Shelf Life: 18 months from date of manufacture
  • If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
  • To change or disconnect canister: turn canister valve to the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
  • Reconnect the spray hose to a new canister of adhesive. OR if you are NOT connecting to a new canister, connect hose to canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.
  • Consult Material Safety Data Sheet prior to use.
  • Do not store at temperatures over 120°F/50°C.
  • Avoid exposure to direct sunlight.
  • Do not store directly on concrete floor.
  • Always store above 60°F/15°C
  • When connected, keep valve open and hose pressurized at all times
  • Always test our adhesives to determine suitability for your particular application prior to use in production