Monarch Inks

SKU:

Regular price $120.00 CAD
Regular price Sale price $120.00 CAD
Sale Sold out
Shipping calculated at checkout.

Monarch Yeti LB White is a non-phthalate, lead free, High Opacity, bright, high performance white that has excellent coverage on dark garments. The low tack formula allows printing through finer mesh counts without the use of viscosity modifier. Yeti LB White performs well on both automatic and manual presses. Has good bleed resistance for printing on Polyester Blends.

 

Substrate:

 Polyester Blends, Tri-Blends, Poly/Cotton, Cotton, and stretch fabrics

Format

In stock

disabled
View full details

Often Purchased With

Additional Information

  • Creamy, short body plastisol
  • High opacity and great coverage
  • Whitest white on the market
  • Good bleed resistance
  • Fast flash
  • Ultra soft hand
  • Light weight with good drape
  • Wet Ink Tack: Low

  • Surface Appearance: Satin Finish

  • Bleed Resistance: Good

  • Opacity: High

  • Gel point: 160 °F

  • Flash Temp: 230° - 250°F

  • Fusion Temp: 290° - 320° F

  • Squeegee Blade: 70° - 80° durometer

  • Mesh Count: 86 – 156 mc in

Print Yeti LB white straight from the container through mesh ranging from 86 to 156 mc without modifications of the viscosity. Use finer mesh counts for softest hand and good opacity. Stir ink before use.

65°F to 95°F avoid direct sunlight. Never exceed temperatures above 95°F during storage.

Stir plastisol ink before printing. Any modifiers and additives should be mixed in clean containers using clean mixer blades and ink knives. Any contamination from other ink sources could make the ink test positive for restricted phthalates. Do not dry clean, iron or bleach the printed image.

 

Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion, and unacceptable durability.

 

Adjust flash cure temperature and dwell time so ink is just dry to touch. Avoid excessive flash temperatures to protect fabric and migration of dyes. If surface is hot and tacky, the ink film has been over flashed. Reduce temperature or time to prevent an inter-coat adhesion problem.

 

Curing is a time and temperature process, a lower oven temperature setting with a slower belt speed while maintaining recommended ink cure temperature is always best to protect fabric, control dye migration and reduce energy consumption.

 

Yeti LB White can be cured between 290°F - 300°F. Running at the higher end of the temperature range and/or longer dwell times maybe required to achieve proper cure on jobs that contain cotton, high ink deposits or heavy weight garments.

 

*Note: Poorly dyed polyester or too much heat in the curing process can overcome any low bleed inks ability to block the migration. For sever migration use a barrier base underlay.