Ecofreen
Mister-T2 Pretreatment Machine
Mister-T2 Pretreatment Machine - Without Table
SKU:
Ecofreen Mister-T2 Automatic Pretreat Machine is an advanced pretreat spray machine with hassle-free dual nozzles cleaning and an anti-clogging wet cap. With a smooth and precise spray of this machine, you can get quality prints with consistent outcomes. The Mister-T2 is compact and lightweight, so you will be able to move it around and work with limited space.
Made of aluminum and stainless steel, the machine remains rust free and can be easily maintained because of its top open design. With a laser pre-scanning the spraying area, easy drainage, space for thick garments like hoodies, ventilation fan, and multi-inlet selector valves that allow you to easily switch from pretreatment liquid to water, this machine is perfect for any Direct-to-Garment pretreatment.
Additionally, this machine allows you to save your favorite settings so you can use them again later. With its auto nozzle cleaning, a flushing program, and a capping station, the Mister T-2's nozzles will not dry or clog after usage.
Mister-T2 can be clean and operated easily without much experience. You will save time and cost with this machine!
Product Resources
Often Purchased With
-
Firebird DTG Pre-treatment Cleaning Solution
FBX-PCS-1GRegular price From $79.00 CADRegular priceUnit price per -
FBX-500 NOVA Universal DTG Pre-treatment
FBX-GEN3-1GRegular price From $79.00 CADRegular priceUnit price per
Additional Information
- 2 Nozzles
- Adjustable Nozzle Angle for complete spraying coverage
- Consistent spraying
- Adjustable Spraying Area
- Preset: Frequent options can be saved and retrieved
- Real-Time Cost Calculation of Liquid for each spraying (Cents)
- Pre-Scanning: Preview the spraying are with a laser.
- Nozzle Capping Station Protects the nozzles from drying or clogging
- Smart Auto Nozzle Cleaning and Flushing Program: With the machine on, it will automatically purge water every 4 hours to prevent the nozzles from clogging.
- Rust Free Structures and Parts: All Structures and parts are made of Aluminum and Stainless Steel
- LED Light
- Ventilation Fan: The fan is designed to prevent the pretreat mist from getting stuck and clogged in parts of the machine
Additional Features
- Open Top Design for easy maintenance
- Easy Drainage: The front legs are slightly higher than the back legs and also has a slanted basement.
- Enough Space for thick garments like hoodies.
- Multi-Inlet Selector Valves
- Easy to Switch from pretreat to water
- Easy Control Panel
- 12 Months Warranty (1 Year)
| Dimensions | 22.04” x 31.49” x 23.22” (560mm x 800mm x 590mm) |
|---|---|
| Weight | 110.23lbs (50Kgs) |
| Spray Cycle Time | 3 sec ~ 9 sec, by 1 to 5 speed |
| Number of Spray Nozzle | Two Nozzle s |
| Maximum Spray Area | 40cm x 50cm (16" x 20") |
| Power Supply | Free Voltage (100V ~ 240V 50/60hz) |
| Power Consumption | 60 W |
| Packing Si ze | W26.37” x L36.81” x H33.07” (W670mm x L935mm x H840mm) |
| Liquid Consumption |
With Minimum Speed: about 85ml With Maximum Speed: about 12ml |
The Mister Table is the perfect place for your DTG printer, heat press, and pretreatment machine! This table provides a convenient waist-level height for your equipment, can bear a load of up to 500 lbs, includes heavyweight and lockable swivel wheels, and a waste tank holder on the backside for waste ink bottles or pretreatment.
- Dimensions: 25.6" (W) by 33.5" (L) by 33.3" (H)
- Package Size: 31.5" (W) by 40" (L) by 8" (H)
- Weight: 80.5 lbs
- Height Between Shelves: 11.8"
- Assembly Required.
Is the Mister-T2 Pretreatment Machine right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Mister-T2 Pretreatment Machine to your apparel decorating business.