Tajima

SKU:

Financing Options

  Made In Japan


A Mixed type series to increase production efficiency and open the way to versatile embroidery expressions! Chenille embroidery and standard embroidery have been brought together in one embroidery machine. A chenille embroidery head is coupled with a standard embroidery head in a pair (available up to 15 pairs).

Configuration Options
View full details

KEY FEATURES
 

  • High-speed operation at 750 rpm has been brought to reality

    High-speed operation at 750 rpm (in comparison with our previous specification of 600 rpm) has drastically increased productivity.

  • Automatic change of 6 colors enables versatile multicolor arrangement

    A setting on the operation panel allows the operator to select desired colors.

  • Automatic lift-up mechanism

    The Needle, Nipple and Presser foot are automatically lifted up for easier frame exchange operation.

  • Automatic needle height adjusting mechanism

    Needle height is adjustable in 10 steps according to the loop height or chain size.

  • Tie-off function to prevent the thread from fraying

    Chain stitches are automatically inserted for some stitches after completion of loop stitches for prevention of thread fraying that causes production error.

STANDARD EMBROIDERY HEAD
 

  • ball screw drive system
    A ball screw drive system has been adopted to reduce the time for color change operation

    A ball screw drive system, widely used for precision positioning control of industrial machinery, has been introduced to the color change drive system. The time required for color change from the first to the ninth needles has been reduced from about 3 to 1.1 seconds, drastically improving productivity of multicolor embroidery.

  • Thread breakage detector
    Thread breakage detector to prevent production error

    A sensor monitors thread movement at all times. If the upper or under thread is broken, this system detects it in an instant and stops stitching to prevent embroidery production from continuing with broken thread. The sensitivity of the sensor is adjustable on the operation panel, depending on the embroidery conditions.

  • Middle thread guide
    Middle thread guide with thread take-up spring, keeping the balance of upper and under threads〈PAT〉

    The thread take-up spring picks up excess thread and stabilizes the balance of upper and lower threads at high speed operation, improving thread tension. Thread breakage has been reduced by 30 – 50% (compared with our previous specification) due to extra fine satin stitches (2mm or less), needle tip or thread untwisting etc.

  • Spiral tube
    Spiral tube, Take-up lever guard〈PAT〉, paying attention to safety

    Spiral tubes between the upper thread course stand and the individual tension base protect upper 1 threads against environmental wind, generated by air conditioner, etc. which causes thread to be entangled with each other. Furthermore, uniquely developed covers are mounted onto the take-up levers to prevent threads from getting entangled during high-speed operation and to improve safety in working.

TECHNOLOGY AND FUNCTION
 

  • User-friendly operation panel in pursuit of operational convenience

    An easy-to view color LCD operation panel and special use keys are designed in a compact interface to enable operation by instinct. The job currently being embroidered on the machine is displayed on the screen in real time 〈PAT〉.

  • Sleep mode function to save energy

    The energy saving function of a personal computer has been introduced to the operation panel. Holding down a single button sets the machine in the standby status and pressing it once more cancels this function. Unnecessary power consumption can be kept down without turning off the main power.

  • “Condition memory” function, supported by Tajima binary format

    Design start position and stitching conditions, registered by an embroidery machine, can be output to USB memory or other media together with the design data. They can be easily recalled and reusable for reproduction. Tajima binary data format (TBF) is supported to create more complicated designs.

  • Data input/output

    Design data input or output is available, using USB memory.
    ※Commercially available USB memory reader/writer is applicable.

  • LAN support for networking

    LAN port is prepared for easy access to networking function, using DG/ML by PULSE (option).

  • Table offset switch〈PAT.P〉

    This special switch is mounted under the table of a jumbo embroidery machine to retract the frame temporarily to any position out of the way for jobs such as threading.

  • Safety Beam Sensor
    Safety Beam Sensor

    A beam surrounds the work area while machine is in motion. If the plane is broken the machine will immediately stop.

  • Slim Cylinder
    Slim Cylinder

    Slim Cylinder makes it possible to embroider on smaller products such as socks, gloves, and pockets. 

  • Cap Driver
    Cap Driver

    The cap driver incorporates a lower shaft and a third locking pin to stabilize the cap during embroidery to enhance quality, and run at higher speeds.

  • Thread Locking
    Thread Locking

    The Thread Locking System secures the thread after a trim to help prevent the thread pulling out during needle startup.

  • Trimmed Needle Plate
    Trimmed Needle Plate

    A shorter distance between the needle hole and the edge of the trimmed needle plate offers an increased embroidery area on many items.

  • Thread Break Detection
    Thread Break Detection

    A sensor monitors the thread movement while stitching.  If the tension on the upper or lower thread is broken the machine stops stitching relaying an error on the controller.

  • LED Needle Base Light
    LED Needle Base Light

    The LED Needle Base Light illuminates the needle area and provides the operator a better view of the item being embroidered.

  • Steeper Head Tilt
    Steeper Head Tilt

    The Steeper Tilt Head angles the bill of a cap more which allows stitching closer to the bill and increases the embroidery area.

Additional Information

The most advanced and reliable high-tech function and mechanisms
 

  • User-friendly quiet operation

    • The latest noise reduction developments help create a quiet and pleasant working environment for operations
     

    Memory

    • The standard memory is 2,000,000 stitches and able to store a max of 200 designs
     

    Condition memory

    • Stitch conditions can be memorized together with embroidery data. The saved stitch conditions are applicable to job repeat or other machines.
     

    Scale up/down. Rotate

    • You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1- degree increments.
     

    Automatic repeat

    • A design can be automatically repeated up to 99 times both vertically and horizontally.
     

    Design editing

    • Modify, insert or delete your embroidery design data stitch by stitch.
     

    Satin stitch reduction and expansion

    • Increase or decrease actual stitch length according to the stitch length in a design.
     

    Clean-up function

    • A very helpful function to automatically remove small stitches to prevent thread breakage as well as to improve production efficiency.

  • Frame back / forward

    • Frame back/forward is available in units of 1, 2 or 3 stitches, stop codes or designated stitch count.
     

    Productivity

    • Production efficiency has been improved by decreasing downtime caused by color changes, thread trimming etc.
     

    Origin return

    • The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.
     

    Trace function

    • Confirm whether or not a design will fit in a frame before embroidery.
     

    Automatic offset / manual offset

    • Facilitate applique fabric placement and frame changing.
     

    Automatic upper/under thread trimming device ATH

    • Automatically operates to trim threads by commands in a design data.
     

    Power failure control measures

    • You can continue to operate the machine even after an unexpected power failure during embroidery without being annoyed by a production error due to design displacement.



     



Additional Features
 

  • Auto Color Change

    • Auto needle bar change on color changes within the designs.


    Large Stitch Memory

    • Depending on the model purchased X21 controller on TMB and MX models come with 2,000,000 stitch capacity and TMEX touch panel controller has capacity of 4,000,000.


    Auto Thread Break Sensor

    • Machine will automatically sense any change in tension with upper thread break or snag.

    Auto Thread Trim

    • Trimmer within needle plate is auto within all trims within a design

    Barcode Ready

    • All machine equipped with multiple USB ports for easy use of any USB style barcode reader

    Color LCD Panel

    • Color LCD panel allows for easy navigation

    Cubical Frame Design

    • A large 14.2" x 19.7" sewing field lets Tajima Embroidery Machines take on the big jobs! Full backs and fronts are no problem.

    High Speed Rotary Hook

    • The rotary hook ensures stable stitching at high production speeds; thereby minimizing thread breaks while balanced thread tension.

     

  • LAN Enabled

    • Tajima Embroidery Machines are LAN enabled to connect with your network.   Easily transmit designs and improve workflow.

    Large Sewing Field

    • A large 14.2" x 19.7" sewing field lets Tajima Embroidery Machines take on the big jobs. Full backs and fronts are no problem.

    Quick Frame Changeover

    • Easily switch from caps to tubular to flats to cylinder sewing.

    Safety Beam Sensor

    • An invisible beam of light surrounds the work area of the machine while sewing. Breaking the beam stops the machine

    Picker-Free Embroidery

    • Picker has been eliminated to cut down on bird's nests ensuring deduction in product loss

    USB Enabled

    • Data can be transferred to the controller via USB Flash Drive or LAN machine connection.

    DCP

    • The digitally controlled presserfoot eliminates stitch skipping, trimming errors, and uneven embroidery.

Model TMAR-VC
Needles 15
Factory Options Position Marker, Automatic lubrication system
Options Beam sensor, LED Light
Speed Max. 1,100rpm
Electricity 3-phase, 200 ~ 240V, 350 / 380 / 400 / 415 / 440V
Power Consumption 700W

 

No. of Heads Head Interval Cap Tubular Dimension

12 Head Without Table

360 mm

3" x 14.2"

17.3" x 11"

222"W x 58" D x 67"H

12 Head With Border Frame

360 mm

3" x 14.2"

17.3" x 11"

229"W x 70"D x 67"H

Is the Tajima TCMX (Chenille Embroidery Machine) right for you?

Enter your info below and a RB Digital sales representative will contact you about adding the Tajima TCMX (Chenille Embroidery Machine) to your apparel decorating business.