Vastex
D-1000 Entry-Level Infrared Dryer
D-1000 Entry-Level Infrared Dryer - 26 Inch Belt / 120V / 1 Phase
SKU:
Compact Infrared Conveyor Dryer Cures Oversized Screen Printed Garments and DTF Adhesives
The D-1000 compact infrared heating model comes with 26 in. (66.1 cm) wide belt and 56 in. (142.2 cm) long conveyor belt, with a 25 in. (63.5 cm) infeed as standard. An optional 10 inch conveyor extension is available if desired. A 27.75 in. (70.5 cm) wide chamber infeed allows for loading of heavier and larger garments.
Also optional is a powered exhaust hood to remove moisture and fumes from the heating chamber — critical for rapid drying of water-based inks and discharge, and curing of DTF adhesives.
At 56 in. (142.2 cm) long and 32 in. (81.3 cm) wide overall, the unit fits on tabletops or on utility carts with tops as small as 30 in. (76.2 cm) square, and is available with an optional mobile stand. It is also suitable for mobile screen printers to power on site using a small generator at fairs, concerts, trade shows and other events where larger garments as well as tees may be screen printed.
It is available in 120V or 240V models equipped with a 20 in. (50.8 cm) wide by 16 in. (40.6 cm) long, 2050 watt heater that carries the same 15-year warranty as all Vastex infrared heaters.
Variable controls for both heat intensity and conveyor speed allow fine-tuning of the drying process according to ink type, ink coverage, desired cure temperature, and rate at which items are being screen printed, or coated with DTF adhesives.
The heater can be raised, lowered and pivoted using lock knobs on the sides of the heating chamber according to the thickness of printed garments and/or the angle of printed images on irregularly shaped items, for uniform curing of the printed area using minimum energy. Heater shields are included as standard to maximize edge-to-edge temperature consistency for increased image quality.
Dense coil pattern, heater shields and a 6.35 watt per sq in (0.98 watt per sq cm) infrared heater eliminate hot and cold spots and provide the power you need to get the job done.
Product Resources
Features And Highlights
-
SMART
Teflon coated fiberglass belt with tracking system
-
BELT WIDTH
(max garment width)
26" (66 cm) -
HEATER WIDTH
20" (51 cm)
-
ADJUSTABLE
Speed, temperature, heater height and tilt
-
FAST
110+* shirts per hour with plastisol and 50+* with discharge
-
PRECISE
Powerful infrared heater with tight coil pattern and heat shields
-
VALUABLE
Best warranty, high quality, exceptional service
-
COMPACT
Total footprint is less than 8 sq.ft (2.44 sq.m)
-
EXTENDABLE
Optional 10" front conveyor extension
Add On Options
To add additional options, our service team will contact you after purchase to assist in fully customizing your dryer.
• Optional powered exhaust removes moisture and fumes — ideal for working in confined spaces, especially when curing of DTF adhesives.
• 10" (25.4 cm) front conveyor extension.
• Optional stands with wheels.
Additional Information
-
D-100 1 Row Plastisol @ 25 secs.** 110+/hr Water Based/Discharge @ 70 secs. ** 50+/hr -
D-1000 1 Row Plastisol @ 25 secs.** 110+/hr Water Based/Discharge @ 70 secs. ** 50+/hr
| D-100 | D-1000 | |
| Heater Warranty | 15 Year | 15 Year |
| Defect Warranty | 3 Year | 3 Year |
| Shirts / Hr* Plastisol @ 25 secs |
110+@ 25 secs. | 110+@ 25 secs. |
| Shirts / Hr* - Waterbased/ Discharge | 50+@ 70 secs. | 50+@ 70 secs. |
| Shirts/hr* - DTG/digital | N/A | N/A |
| Time in Tunnel Range (mm:ss) | 00:17 - 01:20 | 00:17 - 01:20 |
| Belt Speed | 0.6 - 7.4 FPM (0.18 - 2.3 MPM) | 0.6 - 7.4 FPM (0.18 - 2.3 MPM) |
| Exhaust (Free Air) | 177 CFM (optional) | 177 CFM (optional) |
| Exhaust Stack Diameter | 4” (10.16 cm) | 4” (10.16 cm) |
| Overall Length | 46" (117 cm) | 56" (143 cm) |
| Overall Width | 24" (61 cm) | 32” (81 cm) |
| Overall Height | 24" (61 cm) | 24" (61 cm) |
| Belt Width | 18" (45.7 cm) | 26" (66 cm) |
| Chamber Length | 18" (45.7 cm) | 18" (45.7 cm) |
| Chamber Infeed Width | 19.5" (49.5 cm) | 27.75” (70.5 cm) |
| Chamber Infeed Height (adjustable) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) |
| Heat Range (@ Heater) | 0-750 F° (0-399 C°) @ 120 or 240V | 0-750 F° (0-399 C°) @ 120 or 240V |
| Heater Size & Standard Wattage** |
16"x16"(40.6x40.6 cm) |
16"x20"(40.6x50.8 cm) |
| Cost / hour to operate based on 10 cents / kwh |
16 cents | 20 cents |
| Unit Weight | 89 lbs (41 kg) | 114 lbs (52 kg) |
| Shipping Weight** | • Box 1 - 57 lbs (26 kg) • Box 2 - 16 lbs (7.3 kg) • Box 3 - 21 lbs (9.6 kg) • Boxes on skid - 115 lbs (52 kg) |
• Box 1 - 17 lbs (7.7 kg) • Box 2 - 24 lbs (10.9 kg) • Box 3 - 35 lbs (15.9 kg) • Box 4 - 43 lbs (19.5 kg) • Box 5—11 lbs (5 kg) • Boxes on Skid—226 lbs (105.5 kg) |
| Shipping Dimensions** | • Box #1 - 54” x 29” x 8” (138 x 74 x 21 cm) • Box #2 - 21” x 21” x 7” (53x53x18 cm) • Box #3 - 25” x 18” x 6” (64 x 46 x 15 cm) • On Skid - 60” x 32” x 22” (153 x 82 x 56 cm) |
• Box #1 - 27” x 21” x 7” (69 x 54 x 18 cm) • Box #2 - 31” x 21” x 9” (79 x 54 x 23 cm) • Box #3 - 36” x 31” x 8” (92 x 79 x 21 cm) • Box #4 - 36” x 31” x 8” (92 x 79 x 21 cm) • Box #5 - 31” x 15” x 8” (79 x 38 x 21 cm) • On Skid - 49" x 37" x 36" (125 x 94 x 92 cm) |
| Electrical Specs** Chamber | • 120V / 12.5A / NEMA 5-15P • 240V / 6.5A / 1 Ph. / NEMA 6-15P |
• 120V / 16.5A / NEMA 5-20P • 240V / 8.2A / 1 Ph. / NEMA 6-15P |
| Electrical Connection | Cordset Included | Cordset Included |
| Optional Power | 400V / 7A / 3 Ph. / 5 wire 50/60HZ | 400V / 10A / 3 Ph. / 5 wire 50/60HZ |
*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.
All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
- The D-1000 120V dryer uses a NEMA 5-20P plug. Please refer to the image below for reference.
- The D-1000 240V dryer uses a NEMA 6-15P plug. Please refer to the image below for reference.
Is the D-1000 Entry-Level Infrared Dryer right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the D-1000 Entry-Level Infrared Dryer to your apparel decorating business.