Passer aux informations produits
1 de 12

Easiway Systems

Kit de démarrage pour bac de trempage Easiway (peut contenir des écrans jusqu'à 24x33 po) avec barre de maintien

Kit de démarrage pour bac de trempage Easiway (peut contenir des écrans jusqu'à 24x33 po) avec barre de maintien - Default Title

SKU:

Prix habituel $1,195.00 CAD
Prix habituel $1,328.00 CAD Prix soldé $1,195.00 CAD
Vente Épuisé
The cost of shipping will be determined after you complete your purchase.

Dans un ensemble pratique tout-en-un, le système de bain de trempage est conçu pour vous faire gagner du temps et de l’argent, sans les désagréments des méthodes de récupération traditionnelles, sans danger et sans toxicité. Ce système rendra votre tissu d’écrans comme neuf pour quelques centimes par écran.

 

Des dizaines de milliers d’entreprises d’impression, des plus petites aux plus grandes au monde, ont adopté cette technologie innovante de bain de trempage : récupération de millions d’écrans pour quelques centimes, réduction de la consommation de produits chimiques jusqu’à 70 % et diminution des besoins en main-d’œuvre jusqu’à 50 %. Ce système est la méthode de récupération d’écrans la plus rapide, la plus sûre et la plus économique qui existe.


Le kit de démarrage comprend :

  • Bain de trempage

  • Solution de trempage RB - 5G

  • Nettoyant pour écrans RB - 1G

  • Nettoyant pour presse textile RB - 1G

  • Anti-brume RB - Quart - x4

  • Brosse Poly - x1

  • Poignée pour tampon de récurage - x1

  • Tampons de récurage - x4

  • Flacons pulvérisateurs de 32 oz avec gâchette - x3

 

Les produits chimiques pour bain de trempage RB Digital peuvent être vidés dans les égouts et peuvent être utilisés pour nettoyer des centaines d’écrans sans être renouvelés. Contrairement aux autres systèmes de bain de trempage, celui-ci suspend et retient les solides. Si vous l’utilisez correctement, aucun dépôt ne se formera dans le bain. Le système de bain de trempage n’a pas de durée de conservation, ce qui maximise sa longévité et sa flexibilité lors de la récupération.

 

Parmi les caractéristiques spéciales figurent une barre de maintien pour garder les écrans immergés dans la solution pendant le trempage, un rebord de goutte-à-goutte dans le bain pour éviter de gaspiller des produits chimiques lors du retrait (non présent sur aucun autre modèle actuellement sur le marché), un réceptacle à boues moulé dans le fond du bain pour éviter que les écrans ne reposent dans les boues et un trou de vidange pour un vidage facile.

 

Remarque : Le couvercle n’est pas inclus et n’est plus fabriqué 

    • Special Order
    disabled
    This product is typically ready for pickup or shipping within one week, subject to lead times provided by manufacturers.
    The Kit de démarrage pour bac de trempage Easiway (peut contenir des écrans jusqu'à 24x33 po) avec barre de maintien is a made-to-order product that is only assembled and prepared for shipment after you place your order. Please note that freight costs are not included in the purchase price. After your purchase, we will contact you to confirm shipping details, provide a shipping quote, and give you the lead times from the manufacturer. Upon payment of the shipping invoice, we will arrange delivery as per your preferences. For additional information, connect with a RB Digital sales specialist today.
    Afficher tous les détails

    Souvent acheté avec

    Additional Information

    Step 1: Assembly

    • Find the white, plastic on-off spigot that is included. This should be attached to the inner wall in a sealed, plastic bag.
    • Turn the tank on its side and insert the threaded end of the spigot into the female receptacle located on the bottom end of the tank.
    • DO NOT OVER TIGHTEN. Usually 2-3 rotations of the spigot are all that is necessary to seal the threads. If the spigot is over tightened, the spin fitting will crack causing the tank to leak. When this is completed turn the tank upright and move to the location where it will be situated.

     

    Step 2: Filling the Tank

    • When the tank has been situated (generally, you would place the tank within close proximity of the washout booth where the screens will be water rinsed) you need to begin filling the tank with water. You will want to add water first and then chemical. Water added to chemical will cause foaming. It is advisable to check the spin fitting/spigot assembly for leaks when the water level reaches that part of the tank.
    • When the water level fills about 2/3 of the tank, you will add RB Dip Solution.
    • Simply mix 7.5 gallons/28 liters of RB Dip Solution with 29.5 gallons/111 liters of water.

     

    Step 3: Reclaiming Screens

    • Scrape as much ink out of your screen, dip your frame in your tank for 1-3 minutes (just enough time to soften your emulsion), bring to your washout booth and high pressure rinse both sides of the screen. Your screen will then be ready for the stain removal process.

     

    1. Scrape as much ink off of your screen as possible

    2. Place screen in your dip tank and let it soak for roughly 2-3 minutes

    3. Pull the screen out of the dip tank and allow excess fluid to drain back into the tank

    4. Bring your screen to your washout booth

    5. High Pressure rinse emulsion off of the screen

    6. Apply RB Screen Wash & Stain Remover (with Degreasers) to both sides of your screen and scrub

    7. High pressure rinse the excess ink and stains from your screen

    8. Low pressure/flood rinse your screen to remove any excess chemical from the mesh

    9. Dry your screen - it will then be ready for reuse

    • Volume: 25 Gallons
    • Outside Tank Dimensions without lid: 37" W x 13" D x 28" H
    • Outside Tank Dimensions with lid: 38" W x 14" D x 29" H
    • Inside Dimensions: 33" W x 7" D x 24.75" H
    • Weight: 37.0 lbs

    1:5 - 1:7 Chemical to Water Ratio Using RB Dip Solution

    • PT525 (25 Gallon Dip Tank)
    • Dip Tank
    • Threaded Drain Fitting
    • Built-in drip ledge
    • Built-in screen hold-down bar
    • Sludge catch molded into the bottom of the tank

     

    Note: Lid not included and no longer manufactured 

    Le Kit de démarrage pour bac de trempage Easiway (peut contenir des écrans jusqu'à 24x33 po) avec barre de maintien est-il fait pour vous ?

    Saisissez vos informations ci-dessous et un représentant commercial de RB Digital vous contactera au sujet de l'ajout de Kit de démarrage pour bac de trempage Easiway (peut contenir des écrans jusqu'à 24x33 po) avec barre de maintien à votre entreprise de décoration de vêtements.