Vastex
PTF-100 DTF Powder-To-Film Applicator
PTF-100 DTF Powder-To-Film Applicator - 110 V
SKU:
The Vastex PTF-100 DTF Powder-to-Film system uniformly coats DTF films with adhesive powder, without dusting and spillage. This reduces waste while improving DTF printing performance and operator safety.
To operate, a filled cartridge is inserted at the top of the unit, and an empty cartridge at the bottom. An operator positions the wet DTF printed film on the application tray, print side up. Once the polycarbonate door is closed tightly, the operator can adjust the angle of the powder deflector and the amount of powder to be released.
With each cycle, the user pulls a lever to release the desired amount of powder, then pushes it to start the timer/vibration. The top cartridge releases adhesive powder which rains down on the film, ensuring complete and even coverage. When empty, the upper cartridge can be switched quickly and cleanly with the lower cartridge containing all excess powder, reducing exposure while eliminating waste and allowing continuous production until refilling is needed.
Features:
- Fits up to 16" x 20" film sheets
- Adjustable timer
- Sealed for mess-free operation
- Interchangeable cartridges for quick and clean refills.
*Lead times vary based on stock availability
Product Resources
Additional Information
Below are recommended settings for curing DTF sheets. Testing was done on RB Onyx DTF film and powder. And RB Vibra DTF ink. (Note: these settings are to be used as a starting point. Settings may vary depending on which DTF film, powder and ink is used)
After powder is applied, place your printed DTF sheet on the Vastex D-100 conveyor dryer (Allow to fully heat up for approximately 10-15 min)
- Set heat at 5.5
- Set belt speed at 15 - Media takes about 2.5 min to go through
- You will have good results with Exhaust on or off
- Voltage: 110V
- Max Media Width: 16 to 20 in sheets
- Shipping Dimensions: 30" x 25" x 39"
- Shipping Weight: 140 lbs
- Machine Dimensions: 31"(H) x 23.5"(W) x 23"(L)
- Machine Weight: 70 lbs
1 Year Warranty
Is the PTF-100 DTF Powder-To-Film Applicator right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the PTF-100 DTF Powder-To-Film Applicator to your apparel decorating business.