Additional Information
-
The Ultimate-Coating-Rack installs almost anywhere in minutes. You only need a Phillips head screwdriver, a pencil, a tape measure and a level.
-
Will accommodate screen 18" - 31"+
-
Proudly made in the USA.
- (1) 16” anodized aluminum extrusion with 4 stainless steel screws pre-installed
- (2) Heavy-duty, stainless steel wall brackets
- (6) Self-starting EZ Anchors
- (6) Screws for anchors
- (1) Instruction sheet
Tools required: Tape measure, level, Phillips-head screwdriver, pencil
1. Measure up from floor 22” then mark the wall with pencil.
2. Using a level, draw a level horizontal line 24” long (the line is 22” up from the floor).
3. Install metal brackets onto both ends of aluminum scoop coater (see photo #2)
4. While holding the center of MMC extrusion, align the bottom of stainless steel brackets on the level line and then trace all six “oval” screw holes onto the wall.
5. Place metal coater/bracket assembly off to the side for next step.
6. Screw in the six white plastic wall anchors into the wall, in center of ovals. Anchors will make their own holes into drywall. If you hit a stud, then do not install an anchor and instead you will later drive a screw into the stud when mounting metal assembly.
7. Hold metal assembly against the wall and drive screws into anchors through the ovals in metal brackets into anchors to secure the rack to wall.