Often Purchased With
-
RB Vibra DTF Ink
Starting at $81.00 CAD
-
NEW
RB Onyx DTF Hot Peel Film - Roll
Prix habituel Du $300.00 CADPrix habituelPrix unitaire par$300.00 CADPrix soldé Du $300.00 CAD
Printed Samples Using Reflective Film
Note: The samples shown are for reference purposes only and may not accurately represent the reflective film. Monitors and screens have variations in colour rendering which can affect the perceived effects. These pictures do not do the film justice and it is always recommended that you see the results for yourself.
Additional Information
- Cold Peel
- Extra Ink Loading
- Anti - Static Treated
- No Oil from the Film
- High Resolution
- Gloss & Clean Finish
- Print your image onto the DTF film. (View the examples of the reflective film with and without light shinning directly on your print to get an idea of what your image will look like)
- Apply DTF powder – shake excess powder off – place in oven until powder is appropriately melted.
- Choose your garment or fabric and place it on your heat press (temperatures and pressures may vary dependent on your fabric type) and press the printed film with the image side facing down between 10 to 15 seconds at 300°F.
- Wait for the film to completely cool down before peeling, then in a very quick motion, rip the film off the fabric from side to side.
- We suggest using a lint roller to remove any excess film that may be left on the fabric.
- A 2-5 sec. press is sometimes recommended after you remove the film.
- Keep out of direct sunlight
- Avoid to use the film in high humidity (Recommended humidity : 50% below)
- Keep dry
- Do not use damaged film which could damage printers