Features And Highlights
- Continuous crop mark detection
- Long accurate tracking
- FineCut – Plug-in for print & cut solutions
Additional Information
High speed continuous crop mark detection
- An optical sensor enables automatic consecutive detection of crop marks throughout the nested image which the Inkjet printer prints, in combination with the automatic adjustment function to obtain precise contour cutting.
- By continuously detecting a maximum of 4 points, nested images in both X axis and Y axis can be cut aligning each image automatically.
- Light pointer easily adjust the head position to crop marks
Accurate media feeding ensures precise contour cutting over longer-length prints.
- Necessary media length is fed in advance to reduce tension during cutting. This functions increases the precision of long-length print media cutting.
“HALF CUT” mechanism, a proprietary technology of Mimaki
- With the original half cut function, the backing sheet can be cut leaving a little bit of half cut connecting points,which can be easily detached when necessary.Various media without backing sheets can be also cut.
Engineered Head Unit
- Media is automatically cut by a standard sheet cutter.
- Selectable clamp pressure with high and low setting ensures accurate cutting of various media.
- Selectable three jog speeds ensure proper and easy positioning of the head to the point.
- Over-cut function makes the starting and ending points overlapped, which eliminates uncut portion of the media.
- Media can be loaded from back or front.
- Up to 6 roll media can be set at a time(1 set standard).
- Plug-in cutting software for CorelDRAW and Illustrator is included.
- A special adaptor to use commercially available pens and USB interface are included.
CG-75FXII | CG-130FXII | CG-160FXII | ||
---|---|---|---|---|
Acceptable sheet width | 90mm~1,040mm (3.54"~40.9") | 90mm~1,580mm (3.54"~62.0") | 90mm~1,880mm (3.54”~74”) | |
Acceptable roll sheet | Outer less than φ200mm , Roll weight less than 18kg | Outer less than φ200mm Roll weight less than 22kg | ||
Effective cutting area*1 | 760mm x 51m(29.9" x 167') | 1,300mm x 51m(51.2" x 167') | 1,600mm×51m(62.9”×167’) | |
Maximum auto cutting width*2 | 870mm (34.2”) | 1,425mm (56.1”) | 1,720mm (67.7”) | |
Maximum cutting speed | 100cm/s (39.3"/s) | |||
Maximum moving speed | 140cm/s (55"/s) | |||
Adjustable speed range*3 | 1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment) |
|||
Mechanical resolution | 5µm(0.0002") | |||
Command resolution | 25µm or 10µm(0.001" or 0.0004")-MGL-IIc | |||
Repeatability | ±0.2mm (Excluding shrinkage / expansion caused by the film temperature) | |||
Max. pressure | 400g | |||
Range of down pressure | Cutter | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | ||
Pouncing | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | |||
Pen | 10~20g(2g step), 20~100g(5g step), 100~150g(10g step) | |||
Acceptable sheet*4 | Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet |
|||
Acceptable sheet for pouncing*5 | Paper thickness: 0.06~0.13mm (0.0024"~0.005") | |||
Applicable tools*6 | Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool |
|||
Type of command | MGL-IIc | |||
Interface | RS-232C,USB | |||
Receiver buffer size | 30MB Standard (20MB when in sorting) | |||
Operational | Temperature | 5~35°C (41~95°F) | ||
Humidity | 35~75%(Rh) Non-condensation | |||
Power requirement | AC100V~240V | |||
Power consumption | 145VA or less | |||
Dimensions (WxDxH) | 1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9") |
1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9") |
2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9") |
|
Weight (with stands) | 50kg(110 lbs.) | 60kg(132 lbs.) | 69kg(152 lbs.) |
*1: Maximum sheet feeding length differs depending on the software.
*2:Sheet width to cut off from the roll.
*3:Restricted sheet width.
*4:Provided that the blade specific to fluorescent type vinyl (SPB-0007)and the blade specific to reflective sheet (SPB-0006)are used.
*5:Pouncing tool intended specifically for pouncing shall be used.
*6:The goods on the market are φ8~φ9 Pen. No guaranty with accuracy, and image quality.
- Specifications are subject to change without notice.
- All trademarks or registered trademarks are the property of the respective owners.
Is the Mimaki CG-FXII right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Mimaki CG-FXII to your apparel decorating business.