Toyoda Aigle DTF Machine

• Reliable ink system design to reduce clogging and downtime
• Better ink consistency than other brands and models
• Self-Cleaning
• Groundbreaking ink technology circulating through the damper 
• Nozzle detection
• 32” printing width
• Onsite certified Mimaki technician setup and training 
• One-year complete warranty, including printheads
• Max Resolution: 1440 dpi
• Simple Operation
• Staggered Head
• Variable Dot
• 3 Way Heater
• Nozzle Drop-out Detection
• Nozzle Recovery Function
• MCT
• Event Notification

*Note: Printer does not come with USB to printer cable. Also purchase a kitchen scale for weighing ink set for eco case cartridge. 

The Toyoda Tunnel 24" Slim DTF Powder Applicator and Dryer is compatible with all roll-to-roll direct-to-film printers.

Features:

• Fits through a 27.5” wide door

• Ideal for two-head machines

• 20” and 24" width models with standard take-up feeding system

• Powder Control System: Holds 1kg of powder, enabling continuous operation for 1.5 hours, significantly reducing labor time and cost

• Heating Tunnel: Enhanced heating area in the oven ensures superior heating, eliminating oil return and delivering perfect prints

• Advanced film detector to turn off and on heating elements

• Reel Upgrade: Features an improved winding system for tighter, neater material rolls

• Functions: Shake powder control, dusting control, PID setting of curing temperature

• Heating Element: 4pcs Quartz infrared heat drying tube

• Rewinding Function: Automatic induction rewinding

• Heating and Drying Mode: Front guide plate heating, upper drying curing

• Cooling Mode: 9 fan air cooling (2 row)

• Powder Spreading Structure: The motor drives the brush to rotate to brush the hot melt powder out of the powder box.

• Powder Shaking Device: the motor drives the powder shaking lever to beat the film to clean up excess hot melt powder.

• Low Power Consumption: Operates at 220V with only 30A making both energy-efficient and environmentally friendly

• One-year complete warranty

Recommended Settings:

• Preheat Temp: 60°C

• Heat Temp: 110°C

• Conveyor Speed: 1

• Powder: 5

• Shaking Speed: 5-7

To change settings, you will need to long press for 3 seconds then short press to confirm. There is a powder holder that needs to be adjusted and placed on top of the film inside the shaker. The edge (appx 2-3mm.) should be gently resting on the film.

The Toyoda Tunnel 24" DTF Powder Applicator and Dryer is compatible with all roll-to-roll direct-to-film printers but pairs best with the Mimaki TxF150-75 as a production solution. 

• Advanced film detector to turn off and on heating elements
• Air vacuum conveyor system to prevent film from slipping
• LCD touch screen for easy use
• 23.5” cure width
• One-year complete warranty

Recommended Settings:

• Preheat Temp: 65°C
• Heat Temp: 90°C
• Conveyor Speed: 2
• Powder: 5
• Shaking Speed: 5-7
• Suction: can be turned off once the film is attached to the media take-up rollers, then will need to be turned on when finished printing

To change settings, you will need to long press for 3 seconds then short press to confirm. There are powder holder guides, that are attached by magnet. The edge (appx 2-3mm.) should be gently resting on the film.

Specifications:

• Maximum Shake Powder Width: 600mm (23.6inches)
• Functions: Shake powder control, dusting control, PID setting of curing temperature
• Heating Element: 4pcs Quartz infrared heat drying tube
• Rewinding Function: Automatic induction rewinding
• Heating and Drying Mode: Front guide plate heating, upper drying curing
• Cooling Mode: 9 fun air cooling (2 row)
• Machine Size: 76.9in x 39.5in x 43in (1953mm x 1002mm x 1092mm)
• Power Shaker and Dryer Weight: 528lbs (240kg)
• Powder spreading structure: The motor drives the brush to rotate to brush the hot melt powder out of the powder box.
• Powder shaking device: the motor drives the powder shaking lever to beat the film to clean up excess hot melt powder.

Electrical Specifications:

• Single Phase
• Rated Voltage: 220V
• Rated Current: 23A
• Rated Power: 5KW
• Energy Consumption: 3.5KW-5KW 

The Toyoda Tunnel DTF Powder Applicator and Dryer is the first 32" shaker/dryer on the market with the capability of curing DTF film rolls up to 32 inches wide. It is compatible with all roll-to-roll direct-to-film printers but pairs best with the Mimaki TxF300-75 as a production solution. The built in fume extractor allows for safe operation.

• Fits through 33.5" width door easily as shaker is seamlessly integrated with 2 parts
• Powder screening net to guarantee the returned powder is cleaner and more thorough. A small dust vacuum is equipped.
• Heating tunnel upgrade increases the length of the heating area in the oven.
• 31.5” cure width
• One-year complete warranty

Recommended Settings:

• Guide belt speed: 30
• Powder shaking speed: 15-30
• Powder spreading speed: 7-10
• Upper drying temperature: 110-160°C
• Rear drying temperature: 110-160°C
• Front guide plate temperature: 60-90°C

The Toyoda Falcon Fume Extractor is the perfect affordable solution for ensuring clean and purified air in your DTF printing workspace. Specially designed to cater to the needs of 24" DTF printers, this extractor efficiently scrubs the air, eliminating harmful fumes and contaminants that may arise during the printing process.

Features:

• High effect filter: This smoke extractor continuously pulls in your dtf powder shaker's fumes and oil, running them progressively through its filter element and inner activated carbon filters to absorb all harmful gases and unpleasant odors.
• Highly mobile: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go.
• Independent design, open it you can use it.
• Adopts the full-scale design, inner oil gas, smoke room are large, have good filter effect.
• Can satisfy dtf powder shaker or sublimation color system's filter requirement.

Tips for Optimal Performance: To maximize the efficiency and longevity of your fume extractor, we recommend the following tips:

1. Drain Management: During operation, make sure to keep the drain closed to prevent any unwanted air or fumes from escaping. However, remember to open the drain at the end of the day to allow any accumulated condensation or liquid to drain away properly.

2. Easy Examination and Replacement: The activated carbon, responsible for trapping odors and impurities, can be effortlessly slid out for examination or replacement. We advise checking the activated carbon regularly and replacing it every three months to maintain optimal filtration performance.

3. Regular Filter Replacement: To ensure continued high-quality air purification, it is essential to replace the filter every six months. This helps maintain maximum efficiency and ensures that the extractor consistently delivers clean and fresh air.

Invest in the Toyoda Falcon Fume Extractor for DTF Dryers and experience the peace of mind that comes with knowing your printing environment is free from harmful fumes. With its ideal size for 24" DTF machines, easy maintenance, and efficient filtration system, this extractor is a reliable addition to any industrial printing setup. Breathe easy and focus on your work, while our fume extractor takes care of the air quality for you.

Package Includes:

• 1 x Fume Extractor
• 2 x Extraction pipes
• 1 x Activated carbon filter (Installed in the machine)
• 1 x Power cord
• 1 x Filter element (Installed in the machine)
• 1 set screws
• 1 x User manual

Specifications:

• Rated Voltage: AC 110V ± 5%
• Rated Current: 4A
• Rated Power: 440W
• Energy consumption: 150~440W
• Max air amount: 23280 cubic feet per hour
• Noise: ≤ 65db
• Machine Size: 20.9in x 22.5in x 53.8in (530mm x 571mm x 1366mm)
• Machine Weight: 198lbs (90kg)
• Package Size: 26.8in x 24.8in x 60.6in (680mm x 630mm x 1540mm)
• Gross Weight: 264lbs (120kg)
• Warranty: 1-year warranty on this Fume Extractor.

Technical Information:

• 110v Standard Plug: With a standard plug, this fume extractor is compatible with most power outlets, providing easy setup and convenience.
• Secure Filter System: The extractor features a reliable filter system held in place by four screws, ensuring stability and preventing any air leakage.

Remarks: In order to achieve better smoke removal effect, it is recommended that the activated carbon be replaced every 3 months and the filter element be replaced every 6 months. Drain the oil at the drain port once every 3 days.
WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment when working with DTF products and processes as fumes may be hazardous.