Vastex
Sécheur infrarouge de milieu de gamme Little Red X2D
Sécheur infrarouge de milieu de gamme Little Red X2D - Ceinture de 30 pouces / 240 V / Monophasé
SKU:
Pour les encres plastisol, à base d'eau, de décharge, l'encre blanche numérique DTG et/ou les adhésifs DTF
Le LittleRed® X2D dispose d'une nouvelle cartographie thermique radicale qui accélère le séchage des encres jet d'encre, à base d'eau et de décharge, ainsi que des encres numériques DTG, du plastisol et/ou des adhésifs DTF, faisant du X2D un équipement au rapport qualité-prix imbattable pour les petits ateliers. Sa conception modulaire permet une extensibilité facilitant l'ajout de chambres et de longueur de convoyeur à mesure que les besoins de production augmentent.
Le modèle X2D est équipé d'une zone de préchauffage haute performance qui propulse la température de l'encre au-delà de 149 °C (300 °F) dès les premiers centimètres du trajet sur le convoyeur à l'intérieur de la chambre de chauffe de 69 cm (27 po). Deux radiateurs infrarouges rapprochés et réglables en hauteur, ainsi que des commandes de chaleur à double zone, maintiennent les températures constantes nécessaires pour le DTG et toutes les autres encres. Le préchauffage rapide maximise le temps de séjour pour chaque type d'encre, permettant d'augmenter la vitesse du tapis du convoyeur et le rendement du tunnel de séchage.
Ce modèle est livré en standard avec un système d'extraction motorisé pour évacuer rapidement l'humidité et les polluants atmosphériques de la chambre de chauffe, ainsi que pour refroidir la paroi extérieure et les commandes.
La longueur du convoyeur est de 168 cm (66 po), avec un dispositif d'alignement de bande à faible friction et des commandes de vitesse de bande permettant de régler précisément les temps de séjour de 35 secondes à quatre minutes.
Les radiateurs de tous les tunnels de séchage Vastex bénéficient d'une garantie de 15 ans, leader sur le marché, et sont dotés de serpentins étroitement espacés pour fournir une chaleur infrarouge à moyenne longueur d'onde et haute densité, garantissant une vitesse de séchage maximale sans points froids ni séchage incomplet souvent associés aux unités conventionnelles.
Tous les tunnels de séchage de la série Little Red possèdent un système de radiateurs inclinables. Fonctionne parfaitement pour le séchage des casquettes.
Impossible de charger la disponibilité du service de retrait
Product Resources
Features And Highlights
-
FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time
-
POWERFUL
240V/6,300 total wattage
-
DEPENDABLE
Industry-leading 15-year heater warranty
-
EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
-
CONSISTENT
Low friction belt aligner and DC belt speed control with digital display
-
FAST
• 240+ garments/hr for plastisol inks
• 90+ garments/hr for water-based or discharge inks
• 26+ garments/hr for DTG digital white ink @ 3.5 minutes -
HEAVY DUTY
"X-Series" Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor
-
ACCURATE
Dual digital PID temperature controller is accurate to +/-1 °F
-
ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater
-
EXPANDABLE
Add additional chambers belt extensions
-
EXHAUST
High powered exhaust to remove fumes and moisture
Add On Options
To add additional options, our service team will contact you after purchase to assist in fully customizing your dryer.
• Additional heating chambers and conveyor belt extensions
• Locking casters for easy mobility
• Creeper gear
• Donut Probe
Modular Expandability Allows Your Dryer to Grow With You
The capacity (belt speed) of all Vastex floor standing conveyor dryers can be doubled or tripled as new or when needs increase by simply adding one or two modular heating chambers and extending the conveyor belt. This eliminates the need to invest in a larger dryer than you need at the onset, and avoids the high cost of purchasing a new dryer when your needs increase.
Additional Information
| LR-X2D-30 | 1 Row |
| Plastisol @ 25 secs.** | 240+/hr |
| Water Based/Discharge @ 50 secs. ** | 122+/hr |
| Digital White Ink @ 3 min. ** | 34+/hr |
Model X2D-30 has a 30 in. (76 cm) wide belt, two 24 in. (61 cm) wide infrared heaters (6300W @ 240V total wattage), and cures up to 240+ garments per hour with plastisol inks, up to 122+ garments per hour with water-based inks, and up to 34 garments per hour with DTG/digital white ink at 3 minutes dwell time.*
| LR-X1D-18 | LR-X1D-30 | LR-X1D-54 | LR-X2D-30 | LR-X3D-30 | LR-X3D-54 | LR-X3D-78 | |
| Heater Warranty | 5 Year | 5 Year | 5 Year | 5 Year | 5 Year | 5 Year | 5 Year |
| Defect Warranty | 2 Year | 2 Year | 2 Year | 2 Year | 2 Year | 2 Year | 2 Year |
| Shirts / Hr* Plastisol @ 25 secs |
162+ | 162+ | 324+ | 240+ | 360+ | 720+ | 1,080+ |
| Shirts / Hr* - Waterbased/ Discharge | 81+ | 81+ | 162+ | 122+ | 185+ | 370+ | 370+ |
| Shirts/hr* - DTG/digital | 34 @ 2 min. 27 @ 2.5 min. 23 @ 3 min. |
34 @ 2 min. 27 @ 2.5 min. 23 @ 3 min. |
68 @ 2 min. 54 @ 2.5 min. 46 @ 3 min. |
51 @ 2 min. 40 @ 2.5 min. 34 @ 3 min. |
77 @ 2 min. 61 @ 2.5 min. 51 @ 3 min. |
154 @ 2 min. 123 @ 2.5 min. 103 @ 3 min. |
231 @ 2 min. 185 @ 2.5 min. 155 @ 3 min. |
| Time in Tunnel Range (mm:ss) | 00:21 - 03:07 | 00:21 - 03:07 | 00:23 - 03:19 | 00:31 - 04:40 | 00:22 - 03:10 | 00:22 - 03:10 | 00:22 - 03:10 |
| Belt Speed | 0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
| Exhaust (Free Air) | 177 CFM (5 CMM) | 280 CFM (7.9 CMM) | 280 CFM (7.9 CMM) | 280 CFM (7.9 CMM) | 388 CFM (11 CMM) | 550 CFM (15.6 CMM) | 1,100 CFM (31.2 CMM) |
| Exhaust Stack Diameter | 4” (10.16 cm) | 6” (15.24 cm) | 6” (15.24 cm) | 6” (15.24 cm) | 8” (20.32 cm) | 8” (20.32 cm) | 8” (20.32 cm) |
| Overall Length | 48” (122 cm) | 48” (122 cm) | 66” (168 cm) | 66” (168 cm) | 88” (224 cm) | 88” (224 cm) | 102” (260 cm) |
| Overall Width | 30” (76 cm) | 41" (105 cm) | 65" (166 cm) | 41" (105 cm) | 41" (105 cm) | 65" (166 cm) | 89” (226 cm) |
| Overall Height | 50” (127 cm | 50” (127 cm | 50” (127 cm | 50” (127 cm | 50” (127 cm | 50” (127 cm | 54” (137 cm) |
| Belt Width | 18” (46 cm) | 30” (76cm) | 54” (137cm) | 30” (76cm) | 30” (76cm) | 54” (137cm) | 78” (198 cm) |
| Chamber Length | 18” (46 cm) | 18” (46 cm) | 18” (46 cm) | 27”(69cm) | 41”(104cm) | 41”(104cm) | 41”(104cm) |
| Chamber Infeed Width | 21” (53 cm) | 33.5" (85 cm) | 33.5" (85 cm) | 33.5" (85 cm) | 33.5" (85 cm) | 57.5" (146 cm) | 81.5” (207 cm) |
| Chamber Infeed Height (adjustable) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) |
| Heat Range (@ Heater) | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-800F° (0-427C°) @ 240V 0-900F° (482C°) - booster | 0-800F° (0-427C°) @ 240V 0-900F° (482C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster |
| Heater Size & Standard Wattage** |
16” x 18” (40 x 45 cm)
1,860 Watts Total (1.86kW) |
16” x 24” (40 x 61 cm)
4,050 Watts Total (4.05kW) |
16” x 48” (40 x 122 cm)
8,100 Watts Total (8.1kW) |
12" x 24" (30 x 61 cm)
6,300 Watts Total (6.3kW) |
12" x 24" (30 x 61 cm)
8,900 Watts Total (8.9kW) |
12" x 48” (30 x 122 cm)
17,800 Watts Total (17.8kW) |
12" x 48” (30 x 122 cm)
26,700 Watts Total (26.7kW) |
| Cost / hour to operate based on 10 cents / kwh |
19 cents | 41 cents | 81 cents | 63 cents | 89 cents | $1.78 | $2.67 |
| Unit Weight | 172 lbs (78 kg) | 220 lbs (100 kg) | 380 lbs (173 kg) | 304 lbs (137.9 kb) | 424 lbs (193 kg) | 636 lbs (289 kg) | 850 lbs (385.6 kg) |
| Electrical Specs** Chamber | 240V / 10A / 1 Ph. / NEMA 6-15P | 240V / 16A / 1 Ph. / NEMA 6-20P | 240V / 32A / 1 Ph. / 3 wire 50/60HZ | 240V / 30A / 1 Ph. / 3 wire 50/60HZ | 240V / 42A / 1 Ph. / 3 wire 50/60HZ | 240V / 83A / 1 Ph. / 3 wire 50/60HZ | 240V / 73A / 3 Ph. / 4 wire 50/60HZ |
| Electrical Connection | Cordset Included | Cordset Included | All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code. | ||||
| Optional Power | 208V / 14.5A / 1 Ph. / NEMA 6-20P | 400V / 8A / 3 Ph. / 5 wire 50/60HZ | 400V / 14A / 3 Ph. / 5 wire 50/60HZ | 400V / 11A / 3 Ph. / 5 wire 50/60HZ | 240V / 24A / 3 Ph. / 4 wire 50/60HZ 400V / 15A / 3 Ph. / 5 wire 50/60HZ |
240V / 45A / 3 Ph. / 4 wire 50/60HZ 400V / 30A / 3 Ph. / 5 wire 50/60HZ |
400V / 46A / 3 Ph. / 5 wire 50/60HZ |
*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.
All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
This dryer does not come with a plug. A plug will need to be added to the supplied pigtail, or the machine will need to be wired direct. We recommend speaking with an electrician if you have any questions.