Beautifully embroider on leather and thick materials.
What is DCP?
The Digitally Controlled Presser foot (DCP) measures the thickness of the fabric in 0.05 seconds per stitch. The height of the presser foot is automatically adjusted according to the thickness of the fabric, and the fabric pressing timing is also optimized.
- Achieve a precise and beautiful finish by minimizing fluttering, which can lead to inconsistencies and errors in embroidery.
- Easily and beautifully finish 3D embroidery and embroidery on difficult materials such as leather and thick materials.
Special features of the “DCP”
With conventional embroidery machines, the presser foot rises from the fabric simultaneously with the needle, lifting the fabric as the needle is removed and causes the fabric to “flutter,” which causes inconsistencies in the embroidery.
DCP automatically sets the presser foot at the optimal height based on the thickness of the fabric and runs independent of the needle, which helps minimize fluttering.
Effective examples for DCP
3D embroidery
An embroidery machine with DCP can automatically adjust to the thickness of the fabric, providing a beautiful finish, even with changes in the thickness.
The back side of thick leather products
Even when embroidering on thick leather materials, the presser foot with the appropriate force can be used to hold and sew the fabric. The needle penetrates firmly, so the back side of the embroidery is finished beautifully.
