Mimaki CJV150 Series
Mimaki CJV150 Series - Default Title
RANGE OF CUTTING FUNCTIONS
The fully automatic and versatile contour cutter is capable of performing full, half-, and perforation-cutting. The versatile system gives operators the ability to pre-cut or post-cut prints, optimizing throughput while reducing waste and defects common to many print/cut applications.
CONTINUOUS CROP MARK DETECTION
The advanced features in Rasterlink 6 enable the CJV150 to automatically detect all printed crop and register marks, calibrate the cutter, and precisely indicates where to start and stop each cutting sequence.
MAPS3 BRINGS IMAGES TO LIFE
The unique imaging technology of the MAPS3 (Mimaki Advanced Pass System 3) practically eliminates banding at higher speeds by employing a proprietary dot randomized pattern throughout the pass modes.
SIMULTAENOUS LAYER PRINTING
RasterLink6 software enables simultaneous three-layer printing for two-sided viewing – color > white > color, or for white over/underprinting.
|Print Head||On-Demand Piezo head|
|Print Resolution||300, 540, 720, 1440 dpi|
|Maximum Print Width||
CJV150-75 : 31.4 in. / 800mm
CJV150-107 : 42.9 in. / 1,090mm
CJV150-130 : 53.5 in. / 1,361mm
CJV150-160 : 63.3 in. / 1,610mm
|Input Power Supply||Single-Phase (AC 100 - 120V / AC 220 - 240V) x2|
1440W x2 or less (100V)
1920W x2 or less (200V)
Temperature: 59°F - 86°F
Humidity: 35 % - 65% Rh (non-condensing)
|Dimensions (W x D x H)||
CJV150-75: 77” x 28” x 55”
CJV150-107: 89” x 28” x 55”
CJV150-130: 99” x 28” x 55”
CJV150-160: 109” x 28” x 55”
11.2 inches / 30 cm per second max
1G Acceleration max
CJV150-75: 278 lb.
CJV150-107: 313 lb.
CJV150-130: 346 lb.
CJV150-160: 370 lb.
Is the Mimaki CJV150 Series right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Mimaki CJV150 Series to your apparel decorating business.