GCC LaserPro - Spirit LS Laser Engraver
- RoHS Compliance
- Drag-N-Play
- Closed-loop DC Servo and Reliable Motion System
- SmartCENTER™ (Patented)
- Astonish 3D Engraving
- TrueImage™ Engraving Technology (Patented)
- SmartACT™ (Patented)
- Innovative Windows Driver
- SmartLIGHT
- Pass-through Front & Rear Doors (Optional)
- DuraGuide Motion Design
- Key Switch & Emergency Stop
- Intuitive Control Panel Interface
- Programmable Origin Modes
- SmartPIN™ Autofocus (Patented)
- Built-In Networking Connection
- Job Preview Function
- SmartLID™ (Patented)
- Bridge Cutting
- SmartPRINT™
- Flame Sprinkler System
- Wi-Fi Router
- Entry-Level Fume Extraction System
- Grid Cutting Table
- Rotary Chuck
- External Interface Control Board
- AAS Contour Cutting Device (Patented)
- External Signal Indicator
- SmartBOX™
- Roll to Roll Auto feeder
- Rotary Attachment
- SmartAIR™ Fine Nozzle
- Dust Prevention Window
- Air Compressor
- SmartGUARD™ Fire Alarm (Patented)
- Honeycomb Table
Work Area |
25’’ x 18’’ (640 x 460mm) Extendable to 29’’ x 18’’ (740 x 460mm) |
|
Max. Part Size (W x L x H) |
All doors closed |
30’’ x 19’’ x 6.5’’ (762 x 482.6 x 165mm) |
All doors open |
30’’ x x 6.5’’ (762 x x 165mm) |
|
Table Size |
31.1.’’ x 20.9’’ (790 x 530mm) |
|
Dimensions (W x L x H) |
44.3 x 28.3 x 39.6’’ (1125 x 720 x 1005mm) |
|
Laser Source |
12 to 1000W 10.6-µm Sealed CO2 Laser / 20W & 60W 9.3-µm sealed C02 Laser |
|
Cooling |
Air-cooled, Operation environment temperature 15° - 30°C (60°-86°F) |
|
Drive |
Closed-loop DC Servo Control |
|
Maximum Motor Speed |
80 IPS |
|
Throughput* |
260.9.3 in² / hr (1683 cm² / hr) |
|
Speed Control |
Adjustable from 0.10-100% (Up to 16 color-linked speed settings per job) |
|
Power Control |
Adjustable from 0-100% (Up to 16 color-linked speed settings per job) |
|
Engraving Capability |
256-level gray scale image processing capability |
|
Distance Accuracy |
0.254 mm or 0.1% of move, whichever is greater |
|
Z-Axis Movement |
Automatic |
|
Focus Lens |
Standard 2.0’’, optional 1.5’’, 2.5’’, $ 4.0’’ available |
|
Resolution (DPI) |
Available 125, 250, 300, 380, 500, 600, 760, 1000, 1500 |
|
Computer Interface |
10 Base-T Ethernet, Full speed 2.0 USB |
|
Compatible Operating Systems |
MS Windows |
|
Display Panel |
4-line LCD display showing current file name, total working time, laser power, engraving Speed, file(s) loaded into memory buffer, setup and diagnostic menus |
|
Safety |
Class I Laser Product Complaint with EN60825 Class II Laser Product Compliant with CDRH 2006/42/EC Machinery Directive Compliance Class 4 Laser Product Compliant with CDRH with the optional pass-through door module |
|
Operation Voltage |
Laser below 80Watt, 100-240VAC, 50-60Hz Auto Switching, Max. 15A Laser 80Watt and above. 200-240VAC, 50-60Hz, max. 15A |
|
Fume Extraction System |
External exhaust system with minimum flow rate 640m³/h (CFM 377ft³/h) is required, 2.3kPA negative pressure (Pure-Air PA-1000FS @ 4’’ exhaust port) |
* Specifications are subject to change without prior notice
*The flow rate is determined by a default fume extraction system; the flow rate may vary due to a different fume extraction system