SKU
Mimaki CG-FXII Series
Mimaki CG-FXII Series
The CG-FXII Cutter Series of rollbased cutters are available in two widths. These models feature high speed, continuous crop mark detection for precise contour cutting. A proprietary half-cut function leaves a small bit of backing sheet at connecting points for easier handling. An over-cut function makes a cross cut at the start and end positions, resulting in sharp edges with no undercut fragments. These models are ideal for producing decals, stickers, cut-vinyl signs and more. The perfect solution for high volume shops.
- Available in 62” and 74”
- Continuous crop mark detection for contour cutting; half cut function for easier handling
- Three selectable job speeds
- Media load from front or back
- Pouncing function (kit needed)
- Perfect companion for any Mimaki roll-to-roll printer
- FineCut9 software included
Specifications
| Type | Roll-based cutting plotter |
| Maximum Media Width | CG-130FXII: 62.2″ (1580 mm) CG-160FXII: 74″ (1880 mm) |
| Cutting Width | CG-130FXII: 51.2″ (1300 mm) CG-160FXII: 62.9″ (1600 mm) |
| Maximum media thickness | Recommended sheets up to 0.01″ (.25mm) including laminate and liner; Up to 0.04″ (1mm) max (results may vary) |
| Maximum Cut Speed | CG-FXII Series: 39.4″ (1000 mm) |
| Moving speed second | CG-FXII Series: 55.0″ (1400 mm) |
| Maximum Cut pressure (Metric grams) | 500g |
| Adjustable speed range | CG-FXII Series & CG-FXII Plus Series: 1-10cm/s: 1cm/s step adjustment (0.39 in-3.94 in/s: 0.39 in step adjustment) 10-50cm/s: 5cm/s step adjustment (3.94 in-19.68 in/s: 2 in step adjustment) 50-100cm/s: 10cm/s step adjustment (19.68 in-39.37 in: 3.94 in step adjustment) |
| Cutter Types | Eccentric cutter, Blade for small character, Blade for reflective sheet, Blade for fluorescent sheet, Blade for PVC with low-pressure, Ball point pen. |
| Mechanical resolution | CG-SRIII Series: X direction: 2.5 μm; Y direction 5 μm CG-FXII Series & CG-FXII Plus Series: 5 μm (0.0002 in) |
| Program steps | CG-SRIII Series: 25 μm or 10 μm (MGL-IIc); 100 μm, 50 μm (MGL-Ic1) CG-FXII Series & CG-FXII Plus Series: 25 μm or 10 μm (MGL-IIc) or 0.0004 in |
| Repeatability | CG-FXII Series & CG-FXII Plus Series: +/- 0.2 mm |
| Downforce pressure | CG-FXII Series & CG-FXII Plus Series: Cutter: 10-20g (2g step), 20-100g (5g step), 100-500g (10g step) Pouncing: 10-20g (2g step), 20-100g (5g step), 100-500g (10g step) Pen: 10-20g (2g step), 20-100g (5g step), 100-150g (10g step) |
| Command | CG-FXII Series & CG-FXII Plus Series: MGL-IIc |
| Interface | USB2.0, RS-232C, Ethernet |
| Receive buffer | CG-FXII Series & CG-FXII Plus Series: 30MB standard, 20MB when sorting |
| Power supply | CG-160FXII: Single-phase (AC 100–120V / AC 220–240V), 145 VA or less |
| Power consumption | 145 VA or less |
| Operational Environment | Operational Temperature 41° – 95° F Operational Humidity: 35–75 % RH (Non condensing) |
| Dimensions (W × D × H) | CG-130FXII & CG-130FXII Plus: 71.8″ x 27.5″ x 47.9″ (182.4 x 69.9 x 121.7 cm) CG-160FXII & CG-160FXII Plus: 83.6″ x 27.5″ x 47.9″ (212.3 x 69.9 x 121.7 cm) |
| Weight | CG-130FXII: 132 lbs. (60 kg) CG-160FXII: 152 lbs. (69 kg) |