Avient™ Specialty Inks INFINITE FX HD SOFT DENSITY is specifically formulated for high density printing with a soft texture feel. Printed images can have either a smooth or textured surface depending on mesh counts and printing parameters. HD Soft Density is soft to the touch, durable and stretchable and prints through a wide range of mesh counts and stencil thicknesses.
This product is typically ready for pickup or shipping within one week, subject to lead times provided by manufacturers.
The 11000 Infinite FX HD Soft White is a special order product that is sourced specifically for you after you place your order. Please note that it may take up to one week for the product to be ready for pickup or shipment, depending on the lead times provided by the manufacturer. After your purchase, we will contact you to confirm the estimated lead times.
Smooth or textured soft surface and good edge definition
Tintable for infinite color combinations
Excellent adhesion to fabrics, stretch properties, and wash durability
Suitable for high density or conventional flat screens
Fabric Types
100% cotton, cotton blends, some synthetics
Mesh
Count: 86-230 t/in (34-91 t/cm)
Tension: 25-35 n/cm2
Squeegee
Durometer: 70/90/70, 70
Profile: Square, Sharp
Stroke: Hard flood, Medium stroke
Angle: 10-15%
Stencil
2 over 2
Off Contact: 1/16" (.2cm)
Emulsion Over Mesh: 15-20% or 200-400 micron
Flash & Cure Temperatures
Flash: 220°F (105°C)
Cure: 320°F (160°C)
Pigment Loading
up to 10% Wilflex PC
up to 15% Wilflex EQ
up to 30% Wilflex MX/RIO
up to 15% Rutland C3 Boosters
Additives
2910 VISCOSITY BUSTER - 1% max 2912
VISCOSITY BUSTER - 1% max
Shipping & Storage
65-90°F (18-32°C)
Avoid direct sunlight.
Use within one year of receipt
Clean Up
Ink degradent or press wash
Use consistent, high-tensioned screen mesh and sharp edged squeegees for best print results. Recommended mesh counts can vary depending on particle size
For best HD results, use open mesh counts with 200 - 400 micron capillary film and print-flash-print. Use a heavy flood to fully fill the open areas of the stencil with ink then print with medium squeegee pressure
Best results when printed directly onto fabric
Adjust off-contact to imprint mesh patterns into HD Soft Base for textured feel and unique design effect
Tintable with plastisol colorants. See Pigment Loading section for suggested tinting percentages. Reduce the amount of white colorant in the formula as specialty base will lighten the color
Adjusting cure temperature and dwell time will yield a variety of textured effects
Stir plastisols before printing.
Do not dry clean, bleach or iron printed area.
Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion and unacceptable durability. Gel and cure temperatures for ink should be measured using a Thermoprobe device placed directly in the wet ink film and verified on the substrate(s) and equipment to be used for production.
It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet the printer’s customer standards or specifications.
Curing is the responsibility of each printer to confirm that the print is fully cured. PolyOne’s cure recommendations are not a guarantee or warranty, but merely suggested starting points for curing evaluations as explained above.
When printing on garments that contain certain dyes, you must pre-test for the potential ghosting. Please refer to our website for more information on this issue.
Wilflex products have been carefully designed to perform within a given viscosity range, and any dramatic change in viscosity is probable to result in a change in printing characteristics
NON-CONTAMINATION OF EPIC INKS: Do not mix EPIC inks with inks, additives or extenders from other companies. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.
Any application not referred in this product information bulletin should be pre-tested or consultation sought with Wilflex Technical Services Department prior to printing.