Toyoda Aigle DTF Machine

The Toyoda Tunnel 24" DTF Powder Applicator and Dryer is compatible with all roll-to-roll direct-to-film printers but pairs best with the Toyoda Falcon Modular DTF Printer as a production solution. 

• Advanced film detector to turn off and on heating elements
• Air vacuum conveyor system to prevent film from slipping
• LCD touch screen for easy use
• 23.5” cure width
• One-year complete warranty

Recommended Settings:

• Guide belt speed: 30
• Powder shaking speed: 15-30
• Powder spreading speed: 7-10
• Upper drying temperature: 110-160°C
• Rear drying temperature: 110-160°C
• Front guide plate temperature: 60-90°C

These values are for reference only (specific temperatures should be set according to the powder's melting point). Adjustments can be made based on the actual material being used.

Specifications:

• Maximum Shake Powder Width: 600mm (23.6inches)
• Rated Voltage: 220V
• Rated Current: 30A
• Rated Power: 6.5KW
• Energy Consumption: 3KW-6.5KW
• Net Weight: 485 lbs
• Gross Weight: 639 lbs
• Overall Dimensions: 94” (L) x 36” (W) x 39” (H)
• Package Dimensions: 77” (L) x 44” (W) x 44” (H)

The Toyoda Falcon Fume Extractor is the perfect affordable solution for ensuring clean and purified air in your DTF printing workspace. Specially designed to cater to the needs of 24" DTF printers, this extractor efficiently scrubs the air, eliminating harmful fumes and contaminants that may arise during the printing process.

Features:

• High effect filter: This smoke extractor continuously pulls in your dtf powder shaker's fumes and oil, running them progressively through its filter element and inner activated carbon filters to absorb all harmful gases and unpleasant odors.
• Highly mobile: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go.
• Independent design, open it you can use it.
• Adopts the full-scale design, inner oil gas, smoke room are large, have good filter effect.
• Can satisfy dtf powder shaker or sublimation color system's filter requirement.

Tips for Optimal Performance: To maximize the efficiency and longevity of your fume extractor, we recommend the following tips:

1. Drain Management: During operation, make sure to keep the drain closed to prevent any unwanted air or fumes from escaping. However, remember to open the drain at the end of the day to allow any accumulated condensation or liquid to drain away properly.

2. Easy Examination and Replacement: The activated carbon, responsible for trapping odors and impurities, can be effortlessly slid out for examination or replacement. We advise checking the activated carbon regularly and replacing it every three months to maintain optimal filtration performance.

3. Regular Filter Replacement: To ensure continued high-quality air purification, it is essential to replace the filter every six months. This helps maintain maximum efficiency and ensures that the extractor consistently delivers clean and fresh air.

Invest in the Toyoda Falcon Fume Extractor for DTF Dryers and experience the peace of mind that comes with knowing your printing environment is free from harmful fumes. With its ideal size for 24" DTF machines, easy maintenance, and efficient filtration system, this extractor is a reliable addition to any industrial printing setup. Breathe easy and focus on your work, while our fume extractor takes care of the air quality for you.

Package Includes:

• 1 x Fume Extractor
• 2 x Extraction pipes
• 1 x Activated carbon filter (Installed in the machine)
• 1 x Power cord
• 1 x Filter element (Installed in the machine)
• 1 set screws
• 1 x User manual

Specifications:

• Rated Voltage: AC 110V ± 5%
• Rated Current: 4A
• Rated Power: 440W
• Energy consumption: 150~440W
• Max air amount: 23280 cubic feet per hour
• Noise: ≤ 65db
• Machine Size: 20.9in x 22.5in x 53.8in (530mm x 571mm x 1366mm)
• Machine Weight: 198lbs (90kg)
• Package Size: 26.8in x 24.8in x 60.6in (680mm x 630mm x 1540mm)
• Gross Weight: 264lbs (120kg)
• Warranty: 1-year warranty on this Fume Extractor.

Technical Information:

• 110v Standard Plug: With a standard plug, this fume extractor is compatible with most power outlets, providing easy setup and convenience.
• Secure Filter System: The extractor features a reliable filter system held in place by four screws, ensuring stability and preventing any air leakage.

Remarks: In order to achieve better smoke removal effect, it is recommended that the activated carbon be replaced every 3 months and the filter element be replaced every 6 months. Drain the oil at the drain port once every 3 days.
WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment when working with DTF products and processes as fumes may be hazardous.