Mimaki
Mimaki CG-FXII
Mimaki CG-FXII - Default Title
SKU:
La série CG-FXII va au-delà
- Deux tailles disponibles :
- CG-130FXII : 62 pouces (158 cm)
- CG-160FXII : 74 pouces (188 cm)
- Détection continue et à grande vitesse des hirondelles
- Fonction demi-coupe
- Fonction de surcoupe
- Pression de serrage sélectionnable
- Trois vitesses de travail sélectionnables
- Chargement du support par l'avant ou l'arrière
- Logiciel FineCut8 inclus
Features and Highlights
-
Beautiful printing. Mimaki's flag-ship printer's "330 Engine" a single print head is mounted to achieve high image quality.
-
Reliable even during busy periods. Highest practical print speed at entry level: 17.0 m²/h
-
Simple design that is easy for anyone to use. Easy to work with, easy to check, and easy to maintain.
-
New SS22 ink, which does not contain GBL, a controlled substance, is provided in an environmentally friendly paper cartridge.
Additional Information
| CJV200-75 | CJV200-130 | CJV200-160 | ||
|---|---|---|---|---|
| Print head | On-demand piezo head | |||
| Print resolution | 600dpi, 900dpi, 1200dpi | |||
| Print gap | By manual 2 levels (1.5/2.0 mm) | |||
| Ink | Type/Color | Eco-solvent ink SS22 (C,M,Y,K,Lc,Lm,Lk,Or) SS21 (C,M,Y,K,Lc,Lm,Lk,Or) *1 BS4 (C,M,Y,K) *Only available in specific countries |
||
| Capacity *2 | SS22：440ml Ink cartridge / 1L Ink pack SS21: 440ml Ink cartridge / 2L Ink pack BS4: 600ml Ink pack *3 / 2L Ink pack |
|||
| Maximum print width | 800mm (31.5") | 1,360mm (53.5") | 1,610mm (63.4") | |
| Media | Maximum width | 810mm (31.9") | 1,370mm (53.9") | 1,620mm (63.8") |
| Thickness | 1.0 mm or lower | |||
| Roll diameter | φ180 mm or less | |||
| Roll weight | 25 kg (55.1 lb) or less | |||
| Roll inside diameter | 2 inch / 3 inch | |||
| Cutting function | Cutting speed | Max. 300 mm/s | ||
| Acceleration | Max. 0.5G | |||
| Cutting pressure | 10 - 450 gf | |||
| Cutter response times | 10 times/sec | |||
| Repeatability | ±0.2 mm (Excluding shrinkage / expansion caused by the film temperature) | |||
| Interface | Ethernet 1000 BASE-T (Recommended) / USB2.0 Hi-speed | |||
| Certifications | VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, Energy Star, RCM, KC |
|||
| Power supply | Single-phase (AC 100–120V/200–240V)×2 50/60Hz±1Hz | |||
| Power consumption | Max. 1,320 W x 2 or less / Min. 4.5 W or less (Sleep mode) | |||
| Operational environment | Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Dust level: General office level |
|||
| Dimensions (W×D×H) | 1,960mm × 748mm × 1,370mm (77.2"×29.4"×53.9") | 2,520mm × 748mm × 1,370mm (99.2"×29.4"×53.9") | 2,770mm × 748mm × 1,370mm (109.0"×29.4"×53.9") | |
| Weight | 105 kg (231.5 lb) | 130 kg (286.6 lb) | 140 kg (308.6 lb) | |
*1 Scheduled to be available in March 2025.
*2 The use of 1L/2L ink packs requires OPT-J0364 MBIS3 (Mimaki Bulk Ink System 3) and OPT-J0576 MBIS BKT OPT (attachment), which are options sold separately.
*3 600 ml ink pack requires eco cartridge (OPT-J0361: ECO CASE 4). Eco cartridges can be used repeatedly by replacing ink packs.
- Some of the samples in this website are artificial renderings.
- Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
- The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
- Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
Is the Mimaki CG-FXII right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Mimaki CG-FXII to your apparel decorating business.