Mimaki
Mimaki CG-FXII
Mimaki CG-FXII - Default Title
SKU:
La série CG-FXII va au-delà
- Deux tailles disponibles :
- CG-130FXII : 62 pouces (158 cm)
- CG-160FXII : 74 pouces (188 cm)
- Détection continue et à grande vitesse des hirondelles
- Fonction demi-coupe
- Fonction de surcoupe
- Pression de serrage sélectionnable
- Trois vitesses de travail sélectionnables
- Chargement du support par l'avant ou l'arrière
- Logiciel FineCut8 inclus
Features and Highlights
-
RANGE OF CUTTING FUNCTIONS
The fully automatic and versatile contour cutter is capable of performing full, half-, and perforation-cutting. The versatile system gives operators the ability to pre-cut or post-cut prints, optimizing throughput while reducing waste and defects common to many print/cut applications.
-
CONTINUOUS CROP MARK DETECTION
The advanced features in Rasterlink 6 enable the CJV150 to automatically detect all printed crop and register marks, calibrate the cutter, and precisely indicates where to start and stop each cutting sequence.
-
MAPS3 BRINGS IMAGES TO LIFE
The unique imaging technology of the MAPS3 (Mimaki Advanced Pass System 3) practically eliminates banding at higher speeds by employing a proprietary dot randomized pattern throughout the pass modes.
-
SIMULTAENOUS LAYER PRINTING
RasterLink6 software enables simultaneous three-layer printing for two-sided viewing – color > white > color, or for white over/underprinting.
Additional Information
- Max Print Speed: 56.2 m2/h
- Max Resolution: 1440 dpi
- Print & Cut
- Simple Operation
- Variable Dot
- 3 Way Heater
- UISS
- Nozzle Drop-out Detection
- Nozzle Recovery Function
- MCT
- MBIS
- Dye Sublimation
- Crop Mark Detection
- Mark-sensor Function
- Half-cut Function
- Over-cut Function
- Corner-cut Function
- Continuous Print
- Event Notification
| CJV150-75 | CJV150-107 | CJV150-130 | CJV150-160 | ||
|---|---|---|---|---|---|
| Printhead | On-demand piezo head | ||||
| Print resolution | 360 dpi, 540 dpi, 720 dpi, 1,080 dpi, and 1,440 dpi | ||||
| Maximum print width | 800mm (31.5") | 1,090mm (42.9") | 1,361mm (53.6") | 1,610mm (63.4") | |
| Maximum media width | 810mm (31.9") | 1,100mm (43.3") | 1,371mm (54.0") | 1,620mm (63.8") | |
| Ink | Type/Color | Eco-solvent ink ・SS21（C,M,Y,K,Lc,Lm,Lk,Or,W and Si） ・BS3（C,M,Y, and K） *Only available in specific countries ・BS4（C,M,Y, and K） *Only available in specific countries ・ES3（C,M,Y,K,Lc,Lm, and W） Sublimation ink ・Sb53（Bl,M,Y,K/Dk,Lbl, and Lm） ・Sb54（Bl,M,Y,K,Lbl, and Lm） |
|||
| Package size *1 |
SS21: 440ml Ink cartridge / 2L Ink pack (* W and Si are provided in 220ml ink cartridges only) BS3, BS4: 600ml Ink pack / 2L Ink pack ES3: 440ml Ink cartridge (* W is provided in 220ml ink cartridge only) Sb53, Sb54: 440ml Ink cartridge / 2L Ink pack |
||||
| Circulation system |
MCT （Mimaki Circulation Technology） Only applies to white and silver inks | ||||
| Media thickness | 1.0 mm or less | ||||
| Rolled media weight | 40 kg (88 lb) or less | ||||
| Certifications | VCCI class A, FCC class A, ETL UL 60950-1 CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, Energy Star, RCM (CCC is in the process of being acquired.) |
||||
| Interface | USB 2.0, LAN for E-mail notification function | ||||
| Power supply | Single-phase (AC 100–120V / AC 220–240V) | ||||
| Power consumption | 100V:1.44 kVA × 1 or less / 200V: 1.92 kVA × 1 or less | ||||
| Operational environment | Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) |
||||
| Dimensions (W×D×H) | 1,965mm × 700mm × 1,392mm (77"×28"×55") | 2,255mm × 700mm × 1,392mm (89"×28"×55") | 2,525mm × 700mm × 1,392mm (99"×28"×55") | 2,775mm × 700mm × 1,392mm (109"×28"×55") | |
| Weight | 126kg (278 lb) | 142kg (313 lb) | 157kg (346 lb) | 168kg (370 lb) | |
*1 Optional Mimaki bulk ink system 3 (MBIS3) is required for using 2L Ink pack.
Is the Mimaki CG-FXII right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Mimaki CG-FXII to your apparel decorating business.