Vastex
VASTEX- BIGRED4 Sécheurs infrarouges haute performance
VASTEX- BIGRED4 Sécheurs infrarouges haute performance - 30 Inch Belt / 240V / 1 Phase
SKU:
Tous les séchoirs BigRed disposent de deux systèmes d'air indépendants : un échappement de 600 cfm qui descend à travers la courroie et élimine complètement l'humidité et les fumées, et un système « d'air d'appoint » de 400 cfm qui filtre les peluches et les contaminants de l'air entrant dans la chambre de chauffage. De plus, ces modèles sont dotés de deux commandes de température pour les quatre éléments chauffants et d'un lit de refroidissement unique à la sortie qui accélère le refroidissement du vêtement pour un retrait rapide. Les autres caractéristiques de sécurité incluent un "mode de refroidissement" pour la mise hors tension et une tour d'éclairage pour surveiller facilement l'état de la sécheuse.
Spécifications :- VITE
- 475 - 950 +chemises plastisol/h*
- 216 – 432 chemises à base d'eau ou à décharge/h*
- 72 – 144+ chemises DTG/h* avec encre blanche numérique
- EXACT
- Le contrôleur de température est précis à +/- 1 degré F.
- Le PID numérique avec logique floue est le plus avancé de l'industrie
- AJUSTABLE
- La manivelle soulève ou abaisse simultanément toutes les chambres de chauffage jusqu'à 2" - 7" (5 - 17,7 cm) de la ceinture pour les articles volumineux ou les chapeaux
- INTELLIGENT
- Le plateau de refroidissement unique à la sortie refroidit rapidement les vêtements lorsqu'ils quittent la chambre de chauffage
- PRATIQUE
- Voltmètre de vitesse de bande numérique, un must have !
- POLYVALENT
- Air d'appoint et air d'échappement négatif, élimine rapidement l'humidité et les fumées
- FILTRÉ
- L'admission d'air filtré fournit un air de durcissement propre, pas de vapeurs recyclées !
- À TOUTE ÉPREUVE
- Système de suivi de bande transporteuse "X-Series"
- LARGEUR DE CEINTURE - (largeur maximale du vêtement)
- 30" (76 cm) ou 54" (137 cm)
- LARGEUR DE CHAUFFAGE - 24" (61 cm) ou 48" (122 cm)
- LARGEUR D'IMAGE MAXIMALE
- 20" (51 cm) ou 44" (112 cm) (Largeur du radiateur moins 4" [10 cm])
- EXTENSIBLE
- Ajouter des chambres de chaleur et des extensions de ceinture
- Ajouter des chambres de chaleur @ 4,5' (137cm) de long
- Extensions de ceinture, avant ou arrière, 18" (46 cm) de long
- 3 phases, 208, 380, 480 tensions disponibles
- Hotte d'évacuation, fournit une extraction supplémentaire des fumées
- Rail de support de chapeau
- Roulettes verrouillables pour une mobilité facile
- Moteur d'entraînement robuste pour bandes transporteuses
Product Resources
Features And Highlights
-
SMART
Unique cooling bed at exit cools as garments exit the chamber
-
SAFE
Light tower to monitor dryer status, cool-down mode for easier shut-down and fault detection on the exhaust
-
QUIET
The new BigRed 4D models are 20% quieter than earlier models
-
FAST
• 475 - 950+ plastisol shirts/hr*
• 216 - 432+ water-based or discharge shirts/hr*
• 72 - 144+ DTG shirts/hr* with digital white ink -
ADJUSTABLE
Hand crank raises or lowers all heating chambers simultaneously to within 2" - 7" (5 - 17.7 cm) of the belt for bulky items or hats. Models with side heaters can be adjusted from 4 to 7 in. (10 - 17.8 cm) from belt to heater.
-
FILTERED
Filtered air intake prevents dust contamination of images. Filtered exhaust prevents garment lint from entering the blower or exhaust stack
-
ACCURATE
Temperature controller accurate to +/-1°F (+/-0.5°C) Digital PID with fuzzy logic — industry's most advanced
-
CONVENIENT
Digital belt speed voltmeter — a must have
-
VERSATILE
Make-up Air and Negative Exhaust Air — removes moisture and fumes ultra-fast
-
BELT WIDTH
(Maximum garment width)
30" (76 cm) or 54" (137 cm) -
HEATER WIDTH
24" (61 cm) or 48" (122 cm)
-
MAXIMUM IMAGE WIDTH
18 in. (46 cm) or 42 in. (107 cm)
(Heater width minus 6 in. [15 cm]) -
HEAVY DUTY
"X-Series" Conveyor Belt Tracking System
-
EXPANDABLE
Add heat chambers and belt extensions
Add On Options
To add additional options, our service team will contact you after purchase to assist in fully customizing your dryer.
• Additional heating chambers @ 54 in. (137cm) long
• Belt extensions, front or rear @ 18 in. (46 cm) long
• Side heaters to increase "cure zone"
• Control box on left side (right side standard)
• 3 Phase and 208, 380, 480 voltages
• Exhaust hood for extra fume extraction
• Hat support rail
• Locking casters for mobility
• Heavy duty motor drive for conveyor belts
• Donut probe
• Additional heater clearance
Modular Expandability Allows Your Dryer to Grow With You
The capacity (belt speed) of all Vastex floor standing conveyor dryers can be doubled or tripled as new or when needs increase by simply adding one or two modular heating chambers and extending the conveyor belt. This eliminates the need to invest in a larger dryer than you need at the onset, and avoids the high cost of purchasing a new dryer when your needs increase.
Additional Information
-
BR4D-V30S 1 Row Plastisol @ 25 secs.** 475+/hr Water Based/Discharge @ 50 secs. ** 216+/hr Digital White Ink @ 3 min. ** 60/hr Digital White Ink @ 8 min. ** 24/hr -
BR4D-V54S 3 Rows 2 Rows Plastisol @ 25 secs.** 1,425+/hr 950+/hr Water Based/Discharge @ 50 secs. ** 648+/hr 432+/hr Digital White Ink @ 3 min. ** 180/hr 120/hr Digital White Ink @ 8 min. ** 60/hr 48/hr
*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.
Model BR4D-V30 with a 30 in. (76 cm) wide belt and four 24 in. (61 cm) wide heaters (total 11,400 watts) cures 72 garments/h printed with DTG/digital white ink at 2.5 minutes dwell time, 216 garments/h with water-based ink or discharge, and 475 garments/h with plastisol ink or DTF adhesives.
Model BR4D-V54 with a 54 in. (137 cm) wide belt and four 48 in. (122 cm) wide heaters (total 22,800 watts) cures 144 garments/h printed with DTG/digital white ink at 2.5 minutes dwell time, 432 garments/h with water-based ink or discharge, and 950 garments/h with plastisol ink.*
For example, a model BR4D-V54 with four heating chambers can cure 576 garments/h printed with DTG/digital white ink at 2.5 minutes dwell time, 1,728 garments/h with water-based ink or discharge, and 3,800 garments/h with plastisol ink.
| BR4D-V30S | BR4D-V54S | |
| Heater Warranty | 15 Year | 15 Year |
| Defect Warranty | 3 Year | 3 Year |
| Shirts / Hr* Plastisol @ 25 secs |
475+ | 3 Rows - 1425+ 2 Rows - 950+ |
| Shirts / Hr* - Waterbased/ Discharge | 216+ @ 50 secs. | 3 Rows - 648+ @ 50 secs. 2 Rows - 432+ @ 50 secs. |
| Shirts/hr* - DTG/digital | 60 @ 3 min. 24 @ 8 min. |
3 Rows - 180 @ 3 min, 72 @ 8 min. 2 Rows - 120 @ 3 min, 48 @ 8 min |
| Time in Tunnel Range (mm:ss) | 00:12 - 01:45 | 00:12 - 01:45 |
| Belt Speed | 1.8 - 23.6 FPM (0.6 - 7.2 MPM) | 1.8 - 23.6 FPM (0.6 - 7.2 MPM) |
| Exhaust (Free Air) | 500 CFM (14.2 CMM) | 700 CFM (19.8 CMM) |
| Exhaust Stack Diameter | 6” (15.24 cm) | 8” (20.32 cm) |
| Overall Length | 105” (267 cm) | 105” (267 cm) |
| Overall Width | 47.3” (120.2 cm) | 71.4” (181.4 cm) |
| Overall Height | 51.6” (131.1 cm) | 51.6” (131.1 cm) |
| Belt Width | 30" (76 cm) | 54" (137 cm) |
| Chamber Length | 54” (137cm) | 54” (137cm) |
| Chamber Infeed Width | 34.5" (88 cm) | 58.5" (149 cm) |
| Chamber Infeed Height (adjustable) | 4.5" - 7" (11.5 - 17.7 cm) | 4.5" - 7" (11.5 - 17.7 cm) |
| Heat Range (@ Heater) | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster |
0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster |
| Heater Size & Standard Wattage** | 4 @ 12" x 24" (30 x 61 cm) Zone 1 @ 3,600 Watts Zone 2 @ 7,800 Watts Side Heaters 2 @ 3” x 47” (7.6 x 120 cm) 1,400 watts per side 14,200 Watts Total 240V, 380V, & 480V |
4 @ 12" x 48" (30 x 122 cm) Zone 1 @ 7,200 Watts Zone 2 @ 15,600, Watts Side Heaters 2 @ 3” x 47” (7.6 x 120 cm) 1,400 watts per side 25,600 Watts Total 240V, 380V, & 480V |
| Cost / hour to operate based on 10 cents / kwh |
$1.42 @ 240V | $2.56 @ 240V |
| Standard Wattage | 11,400w | 22,800w |
| Shipping Weight*** | 1,018 lbs (462 kg) | 1,438 lbs (653 kg) |
| Shipping Dimensions*** | 72" x 61" x 63" (183 x 155 x 160 cm) | 92" x 65" x 63" (234 x 161 x 160 cm) |
| Electrical Specs** All amps listed below are +/- 10% |
BR4D-V30S | BR4D-V54S |
| 240V, 1 Phase 3 wire 50/60 HZ |
FLA = 63A | FLA = 110A |
| 240V, 3 Phase 4 wire 50/60 HZ |
FLA = 44A | FLA = 70A |
*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.
All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
This dryer does not come with a plug. A plug will need to be added to the supplied pigtail, or the machine will need to be wired direct. We recommend speaking with an electrician if you have any questions.
Is the VASTEX- BIGRED4 Sécheurs infrarouges haute performance right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the VASTEX- BIGRED4 Sécheurs infrarouges haute performance to your apparel decorating business.