Mimaki CG-60AR Cutter

Best-in-class cutting pressure of 550 g and the speed improved to 105% of the conventional model

• The cutting pressure can be selected from 10 g to 550 g, and three types of cutting are possible: normal cutting, complete cutting, and half cutting. The machine can cut a wide variety of materials, including PVC, fluorescent and reflective sheets, and rubber sheets.

Optional products for cutting cardboard can be added to produce packages up to A3 size

• CG-AR Series are now capable of producing high-quality cutouts from plain paper to cardboard with the use of optional products for cardboard cutting, such as a Sheet table, Cutting sheet, Blade for heavy paper and Creasing tool. Using this machine, you can produce paper crafts and packages.

Supporting for Windows plotter driver allows you to cut without the need for dedicated software

• With use of familiar software such as Microsoft Word/Excel/PowerPoint, cutting is now as easy as outputting from a general office printer.

"ID Cut function" provided for efficient Print & Cut

• "ID cut" is a function for automatically cutting data included in an ID simply by scanning the ID register marks output by Mimaki's optionally available printer*. Data transmission from the PC is completed with one-time operation, which drastically saves labor for print & cut and enhances work efficiency.
  * Compatible with the JV330 Series, JV300Plus Series and the JV/UJV100 Series

"Mimaki Remote Access (MRA)" enables to check the machine operation status and operate the panel from a distance

• It is now possible to check the status of the cutting plotter remotely from your iPhone or PC. This function enables operators to check the operation status of the machine and to operate the panel from a distance, allowing them to work more efficiently.

Over cutting and corner cutting

• Over cutting and corner cutting of starting & ending points and other corners are possible, which prevents incomplete cutting.

Continuous Crop Mark Detection

• Crop marks are automatically and continuously detected. Printed graphics are accurately contour cut due to the compensation for image distortion. The detection of a maximum of 4 crop marks provides a precision finish.
  Nested data which are continuously arranged in the directions of X-axis and Y-axis are cut by automatically making corrections.

Segment Compensation

• Intermediate crop marks of the feed direction are detected, enabling four-point corrections for each segment. This leads to accurate, long-length cutting, even if the image is distorted.

Division Cut Function

• Cut is performed by splitting a space larger than the sheet width or splitting long data in the X-axis (feed) direction and the Y-axis (width) direction to avoid cut position gap.

Ethernet Connection

• Network control via integration into office LAN.

Improved assembly and installation

• Up to 30% weight reduction for simplified assembly. The addition of rubber feet makes it easier to adjust the rattle when installing on a tabletop.

Improved cutter holder

• The cutter blade can be changed with less operation than conventional products. (4.5 turns of the knob -> 2.5 turns)

*1: Maximum sheet feeding length differs depending on the software.
*2: For detailed conditions of repetition accuracy, please refer to the instruction manual.
*3: For fluorescent and reflective sheets, use the blade dedicated to each material.
*4: Thick cardboard may reduce cut quality and precision.
*5: Use a commercially available ball-point pen with dia. 8-9 mm and without protrusion nor taper on the clamp position.
*6: When equipped with the optional stand.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice (for technical improvements, etc).
• All trademarks or registered trademarks are the property of their respective owners.