1 1

Vastex

VASTEX- BIGRED4 Sécheurs infrarouges haute performance

VASTEX- BIGRED4 Sécheurs infrarouges haute performance - 30 Inch Belt / 240V / 1 Phase

SKU:

$22,260.00 CAD
$22,260.00 CAD
Vente Épuisé
The cost of shipping will be determined after you complete your purchase.

Tous les séchoirs BigRed disposent de deux systèmes d'air indépendants : un échappement de 600 cfm qui descend à travers la courroie et élimine complètement l'humidité et les fumées, et un système « d'air d'appoint » de 400 cfm qui filtre les peluches et les contaminants de l'air entrant dans la chambre de chauffage. De plus, ces modèles sont dotés de deux commandes de température pour les quatre éléments chauffants et d'un lit de refroidissement unique à la sortie qui accélère le refroidissement du vêtement pour un retrait rapide. Les autres caractéristiques de sécurité incluent un "mode de refroidissement" pour la mise hors tension et une tour d'éclairage pour surveiller facilement l'état de la sécheuse.

Spécifications :
  • VITE
    • 475 - 950 +chemises plastisol/h*
    • 216 – 432 chemises à base d'eau ou à décharge/h*
    • 72 – 144+ chemises DTG/h* avec encre blanche numérique
  • EXACT
    • Le contrôleur de température est précis à +/- 1 degré F.
    • Le PID numérique avec logique floue est le plus avancé de l'industrie
  • AJUSTABLE
    • La manivelle soulève ou abaisse simultanément toutes les chambres de chauffage jusqu'à 2" - 7" (5 - 17,7 cm) de la ceinture pour les articles volumineux ou les chapeaux
  • INTELLIGENT
    • Le plateau de refroidissement unique à la sortie refroidit rapidement les vêtements lorsqu'ils quittent la chambre de chauffage
    • PRATIQUE
      • Voltmètre de vitesse de bande numérique, un must have !
    • POLYVALENT
      • Air d'appoint et air d'échappement négatif, élimine rapidement l'humidité et les fumées
    • FILTRÉ
      • L'admission d'air filtré fournit un air de durcissement propre, pas de vapeurs recyclées !
    • À TOUTE ÉPREUVE
      • Système de suivi de bande transporteuse "X-Series"
    • LARGEUR DE CEINTURE - (largeur maximale du vêtement)
      • 30" (76 cm) ou 54" (137 cm)
    • LARGEUR DE CHAUFFAGE - 24" (61 cm) ou 48" (122 cm)
    • LARGEUR D'IMAGE MAXIMALE
      • 20" (51 cm) ou 44" (112 cm) (Largeur du radiateur moins 4" [10 cm])
    • EXTENSIBLE
      • Ajouter des chambres de chaleur et des extensions de ceinture
    Choix
    • Ajouter des chambres de chaleur @ 4,5' (137cm) de long
    • Extensions de ceinture, avant ou arrière, 18" (46 cm) de long
    • 3 phases, 208, 380, 480 tensions disponibles
    • Hotte d'évacuation, fournit une extraction supplémentaire des fumées
    • Rail de support de chapeau
    • Roulettes verrouillables pour une mobilité facile
    • Moteur d'entraînement robuste pour bandes transporteuses
    * Les vitesses de production sont des estimations et varient en fonction du fabricant d'encre, de l'humidité de l'atelier et d'autres variables.

    Titre
    Volts
    Phase
    • Special Order
    disabled
    This product is typically ready for pickup or shipping within one week, subject to lead times provided by manufacturers.
    The VASTEX- BIGRED4 Sécheurs infrarouges haute performance is a made-to-order product that is only assembled and prepared for shipment after you place your order. Please note that freight costs are not included in the purchase price. After your purchase, we will contact you to confirm shipping details, provide a shipping quote, and give you the lead times from the manufacturer. Upon payment of the shipping invoice, we will arrange delivery as per your preferences. For additional information, connect with a RB Digital sales specialist today.

    Product Resources

    Afficher tous les détails

    Features And Highlights

     

    • HEAVY DUTY

      "X-Series" Conveyor Belt Tracking System

    • PRECISE

      Digital belt speed display for more accurate control

    • ADJUSTABLE

      2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment

    • ACCURATE

      Digital PID with fuzzy logic — industry's most advanced

    • CONSISTENT

      Heavy duty DC belt speed motor with digital voltage display

    • INNOVATIVE

      Engineered to be shorter and slimmer with high heat and production

    • EXPANDABLE

      Add heat chambers and belt extensions

      

    Add On Options
     

    To add additional options, our service team will contact you after purchase to assist in fully customizing your dryer.

    • Add heating chambers @ 36 in. (91 cm) or 54 in. (137 cm) long
    • Belt extensions, front or rear
    • 3 Phase and 208, 380, 480 voltages
    • Exhaust hood for extra fume extraction
    • Hat support rail
    • Locking casters for mobility

      

    Modular Expandability Allows Your Dryer to Grow With You
     

    The capacity (belt speed) of all Vastex floor standing conveyor dryers can be doubled or tripled as new or when needs increase by simply adding one or two modular heating chambers and extending the conveyor belt. This eliminates the need to invest in a larger dryer than you need at the onset, and avoids the high cost of purchasing a new dryer when your needs increase.

     

    Cutter

    Additional Information

    •  
      ER-VI-30 1 Row
      Plastisol @ 25 secs.** 900+/hr
      Water Based/Discharge @ 70 secs. ** 300+/hr
    •  
      ER-VI-54 2 Rows
      Plastisol @ 25 secs.** 1800+/hr
      Water Based/Discharge @ 70 secs. ** 600+/hr
    •  
      ER-VI-78 3 Rows
      Plastisol @ 25 secs.** 2700+/hr
      Water Based/Discharge @ 70 secs. ** 900+/hr

     

    *Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

    Model ER-VI-30, with 30 in. (76 cm) wide belt and six 24 in. (61 cm) wide heaters (total 15,600 watts) cures up to 900 plastisol-printed garments/h placed in a single row, or 300 garments/h screen-printed with water-based ink or discharge.

     

    Model ER-VI-54, with 54 in. (137 cm) wide belt and six 48 in. (122 cm) heaters (total 31,200 watts) cures up to 1,800 plastisol-printed garments/h placed in two rows, or 600 garments/h screen-printed with water-based ink or discharge.

     

    Model ER-VI-78, with 78 in. (198 cm) wide belt and six 72 in. (183 cm) heaters (total 46,800 watts) cures up to 2,700 plastisol-printed garments/h placed in three rows, or 900 garments/h screen-printed with water-based ink or discharge.

      ER-II-30 ER-II-54 ER-III-30 ER-III-54 ER-III-78 ER-VI-30 ER-VI-54 ER-VI-78
    Heater Warranty 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year
    Defect Warranty 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year
    Shirts / Hr*
    Plastisol @ 25 secs    		 300+ 2 Rows - 600+ 450+ 2 Rows - 900+ 3 Rows - 1,350+ 900+ 2 Rows - 1,800+ 3 Rows - 2,700+
    Shirts / Hr* - Waterbased/ Discharge 100+ @ 70 secs. 2 Rows - 200+ @ 70 secs. 150+ @ 70 secs. 2 Rows - 300+ @ 70 secs. 3 Rows - 450+ @ 70 secs. 300+ @ 70 secs. 2 Rows - 600+ @ 70 secs. 3 Rows - 900+ @ 70 secs.
    Shirts/hr* - DTG/digital N/A N/A N/A N/A N/A N/A N/A N/A
    Time in Tunnel Range (mm:ss) 00:11 - 01:39 00:11 - 01:39 00:17 - 02:29 00:17 - 02:29 00:17 - 02:29 00:15 - 03:00 00:15 - 03:00 00:15 - 03:00
    Belt Speed 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 1.8 - 23 FPM (0.5 - 7 MPM) 3 - 36 FPM (0.9 - 11 MPM) 3 - 36 FPM (0.9 - 11 MPM) 3 - 36 FPM (0.9 - 11 MPM)
    Exhaust (Free Air) 380 CFM (10.7 CMM) 380 CFM (10.7 CMM) 380 CFM (10.7 CMM) 550 CFM (15.6 CMM) 700 CFM (19.9 CMM) 2 @ 380 CFM (10.7 CMM) 2 @ 550 CFM (15.6 CMM) 2 @ 700 CFM (19.8 CMM)
    Exhaust Stack Diameter 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 2 @ 8” (20.32 cm) 2 @ 8” (20.32 cm) 2 @ 8” (20.32 cm)
    Overall Length 87" (221 cm) 87" (221 cm) 105” (267 cm) 105” (267 cm) 105” (267 cm) 159” (404 cm) 159” (404 cm) 159” (404 cm)
    Overall Width 45.2" (114.8 cm) 69.2" (175.8 cm) 45.2" (114.8 cm) 69.2" (175.8 cm) 93.2” (236.7 cm) 45.2" (114.8 cm) 69.2" (175.8 cm) 93.2” (236.7 cm)
    Overall Height 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm)
    Belt Width 30" (76 cm) 54" (137 cm) 30" (76 cm) 54" (137 cm) 78" (404 cm) 30" (76 cm) 54" (137 cm) 78" (404 cm)
    Chamber Length 36" (91 cm) 36" (91 cm) 54” (137cm) 54” (137cm) 54” (137cm) 108” (275cm) 108” (275cm) 108” (275cm)
    Chamber Infeed Width 34.5" (88 cm) 58.5" (149 cm) 34.5" (88 cm) 58.5" (149 cm) 82.5” (209cm) 34.5" (88 cm) 58.5" (149 cm) 82.5” (209cm)
    Chamber Infeed Height (adjustable) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm)
    Heat Range (@ Heater) 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V 0-900 F° (0-482 C°) @ 240V
    Heater Size & Standard Wattage** 12" x 24" (30 x 61 cm) 2 @ 3,600 = 7,200 Watts @ 240V

    12" x 24" (30 x 61 cm) 2 @ 3,000 = 6,000 Watts @ 380V & 480V    		 12" x 48" (30 x 122 cm) 2 @ 7,200 = 14,400 Watts @ 240V

    2 @ 6,000 = 12,000 Watts @ 380V & 480V    		 12" x 24" (30 x 61 cm) 3 @ 3,600 = 10,800 Watts @ 240V

    12" x 24" (30 x 61 cm) 3 @ 3,000 = 9,000 Watts @ 380V & 480V    		 12" x 48" (30 x 122 cm) 3 @ 7,200 = 21,600 Watts @ 240V

    3 @ 6,000 = 18,000 Watts @ 380V & 480V    		 12" x 72" (30 x 183 cm) 3 @ 7,800 = 23,400 Watts @ 240V, 380V, & 480V 12" x 24" (30 x 61 cm) 6 @ 2,600 = 15,600 Watts 240V, 380V, & 480V 12" x 48" (30 x 122 cm) 6 @ 5,200 = 31,200 Watts 240V, 380V, & 480V 12" x 72" (30 x 183 cm) 6 @ 7,800 = 46,800 Watts 240V, 380V, & 480V
    Cost / hour to operate
    based on 10 cents / kwh    		 72 cents @ 240V 60 cents @ 380V & 480V $1.44 @ 240V $1.20 @ 380V & 480V $1.08 @ 240V 90 cents @ 380V & 480V $2.16 @ 240V $1.80 cents @ 380V & 480V $2.34 @ 240V, 380V, & 480V $1.56 @ 240V $3.12 @ 240V $4.68 @ 240V
    Standard Wattage 7,200w 14,400w 10,800w 21,600w 23,400w 15,600w 31,200w 46,800w
    Shipping Weight*** 665 lbs (302 kg) 1,130 lbs (513 kg) 900 lbs (409 kg) 1,375 lbs (624 kg) Call for details 1 @ 900 lbs (409 kg)
    1 @ 755 lbs (343 kg)    		 1 @ 1,375 lbs (624 kg)
    1 @ 1,325 lbs (601 kg)    		 Call for details
    Shipping Dimensions*** 61" x 43" x 65" (155 x 110 x 166 cm) 78" x 49" x 65" (199 x 125 x 166 cm) 61" x 61" x 65" (155 x 155 x 166 cm 93" x 65" x 65" (237 x 166 x 166 cm) Call for details 2 @ 61” x 43” x 65” (155 x 110 x 166 cm) 2 @ 93” x 65” x 65” (237 x 166 x 166 cm) Call for details

     

     

    Electrical Specs**
    All amps listed below are +/- 10%    		 ER-II-30 ER-II-54 ER-III-30 ER-III-54 ER-III-78 ER-VI-30 ER-VI-54 ER-VI-78
    240V, 1 Phase
    3 wire 50/60 HZ    		 FLA = 32A FLA = 65A FLA = 50A FLA = 97A FLA = 100A FLA = 68A N/A N/A
    240V, 3 Phase
    4 wire 50/60 HZ    		 FLA = 19A FLA = 37A FLA = 29A FLA = 55A FLA = 60A FLA = 41A FLA = 78A FLA = 117A

     

    *Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

     

    All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.

    This dryer does not come with a plug. A plug will need to be added to the supplied pigtail, or the machine will need to be wired direct. We recommend speaking with an electrician if you have any questions.

    Is the VASTEX- BIGRED4 Sécheurs infrarouges haute performance right for you?

    Enter your info below and a RB Digital sales representative will contact you about adding the VASTEX- BIGRED4 Sécheurs infrarouges haute performance to your apparel decorating business.