Mimaki

SKU:

Financing Options

The Mimaki CG-FXII Series of roll-based cutters are available in three widths. These models feature high speed, continuous crop mark detection for precise contour cutting. A proprietary half cut function leaves a small bit of backing sheet at connecting points for easier handling. An over cut function makes a cross cut at the start and end positions, resulting in sharp edges with no undercut fragments. These models are ideal for producing decals, stickers, cut-vinyl signs and more.

  • Three sizes available:
    • CG-75FXII: 40 inches (101 cm)
    • CG-130FXII: 62 inches (158 cm)
    • CG-160FXII: 74 inches (188 cm)
  • High speed, continuous crop mark detection
  • Half cut function
  • Over cut function
  • Selectable clamp pressure
  • Three selectable job speeds
  • Media load from front or back
  • FineCut8 software included
View full details

Features And Highlights

 

  • Continuous crop mark detection
  • Long accurate tracking
  • FineCut – Plug-in for print & cut solutions

  

Additional Information

High speed continuous crop mark detection

  • An optical sensor enables automatic consecutive detection of crop marks throughout the nested image which the Inkjet printer prints, in combination with the automatic adjustment function to obtain precise contour cutting.
  • By continuously detecting a maximum of 4 points, nested images in both X axis and Y axis can be cut aligning each image automatically.
  • Light pointer easily adjust the head position to crop marks

 

Accurate media feeding ensures precise contour cutting over longer-length prints.

  • Necessary media length is fed in advance to reduce tension during cutting. This functions increases the precision of long-length print media cutting.

 

“HALF CUT” mechanism, a proprietary technology of Mimaki

  • With the original half cut function, the backing sheet can be cut leaving a little bit of half cut connecting points,which can be easily detached when necessary.Various media without backing sheets can be also cut.

 

Engineered Head Unit

  • Media is automatically cut by a standard sheet cutter.
  • Selectable clamp pressure with high and low setting ensures accurate cutting of various media.
  • Selectable three jog speeds ensure proper and easy positioning of the head to the point.
  • Over-cut function makes the starting and ending points overlapped, which eliminates uncut portion of the media.
  • Media can be loaded from back or front.
  • Up to 6 roll media can be set at a time(1 set standard).
  • Plug-in cutting software for CorelDRAW and Illustrator is included.
  • A special adaptor to use commercially available pens and USB interface are included.
  CG-75FXII CG-130FXII CG-160FXII
Acceptable sheet width 90mm~1,040mm (3.54"~40.9") 90mm~1,580mm (3.54"~62.0") 90mm~1,880mm (3.54”~74”)
Acceptable roll sheet Outer less than φ200mm , Roll weight less than 18kg Outer less than φ200mm Roll weight less than 22kg
Effective cutting area*1 760mm x 51m(29.9" x 167') 1,300mm x 51m(51.2" x 167') 1,600mm×51m(62.9”×167’)
Maximum auto cutting width*2 870mm (34.2”) 1,425mm (56.1”) 1,720mm (67.7”)
Maximum cutting speed 100cm/s (39.3"/s)
Maximum moving speed 140cm/s (55"/s)
Adjustable speed range*3 1-10cm/s : 1cm step adjustment
(0.39"-3.94"/s : 0.39" step adjustment)
10-50cm/s : 5cm step adjustment
(3.94"-19.68"/s : 2" step adjustment)
50-100cm/s : 10cm step adjustment
(19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution 5µm(0.0002")
Command resolution 25µm or 10µm(0.001" or 0.0004")-MGL-IIc
Repeatability ±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Max. pressure 400g
Range of down pressure Cutter 10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
Pouncing 10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
Pen 10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4 Vinyl up to 0.25mm(0.01")thickness,
Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing*5 Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools*6 Cutter, Water based ball-point pen,
Oil based ball-point pen, Pouncing tool
Type of command MGL-IIc
Interface RS-232C,USB
Receiver buffer size 30MB Standard (20MB when in sorting)
Operational Temperature 5~35°C (41~95°F)
Humidity 35~75%(Rh) Non-condensation
Power requirement AC100V~240V
Power consumption 145VA or less
Dimensions (WxDxH) 1,285mm(50.5")x
700mm(27.5")x
1,217mm(47.9")
1,825mm(71.8")x
700mm(27.5")x
1,217mm(47.9")
2,125mm(83.6")x
700mm(27.5")x
1,217mm(47.9")
Weight (with stands) 50kg(110 lbs.) 60kg(132 lbs.) 69kg(152 lbs.)

*1: Maximum sheet feeding length differs depending on the software.
*2:Sheet width to cut off from the roll.
*3:Restricted sheet width.
*4:Provided that the blade specific to fluorescent type vinyl (SPB-0007)and the blade specific to reflective sheet (SPB-0006)are used.
*5:Pouncing tool intended specifically for pouncing shall be used.
*6:The goods on the market are φ8~φ9 Pen. No guaranty with accuracy, and image quality.

  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of the respective owners.

Is the Mimaki CG-FXII Series Cutter right for you?

Enter your info below and a RB Digital sales representative will contact you about adding the Mimaki CG-FXII Series Cutter to your apparel decorating business.