SKU
RBE-DS
RB Dip Solution
As low as
$47.00
RB Dip Solution One Step Ink Cleaner & Emulsion Remover is designed to dissolve plastisol inks and remove emulsion from the screen printing mesh-at the same time. This product is for use in a dip tank-for superior time and chemical savings. RB Dip Solution is an ultra-concentrated liquid and designed to be mixed with water 1:5 while remaining homogenous.
Dip Solution Tech SheetSPECIAL FEATURES:
- RB Dip Solution dissolves and cleans ink, emulsion and blockout in one step which makes the job of screen reclaiming much faster and more efficient.
- RB Dip Solution has no odor which makes the job of screen reclaiming much more pleasant.
- RB Dip Solution has no VOC’s making this product safer than solvents for air quality concerns.
- RB Dip Solution is non-flammable which makes it safer for handling, storage and rag disposal than conventional solvents.
APPLICATION FOR USE IN A DIP TANK:
- Mix RB Dip Solution at a ratio of up to 1:5 with water in a plastic tank.
- Scrape excess ink from screen.
- Place screen in dip tank.
- Let soak in tank until the emulsion/film loosens from the screen. Usually 2-3 mins.
- High pressure rinse screen, then flood rinse.
- If stubborn stains remain, apply an RB Screen Wash, scrub & rinse
APPLICATION FOR MANUAL USE:
- Scrape excess ink from screen.
- Apply RB Dip Solution (full strength) by brush, wipe, scrub pad or spray to the print side of the screen and scrub.
- High pressure rinse the print side, followed by high pressure rinse well side.
- Flood rinse entire screen with a low pressure rinse.
- If stubborn stains remain, apply RB Screen Wash, scrub & rinse.