The machine supports the sewing of straight pockets (with flaps) on suits, jackets and pants. Double-/single-welt sewing can be changed over by the simple touch of a key on the operation panel.
- The "direct-drive motor", which transfers the motor power to the machine with no energy loss, not only offers economical benefits due to the power reduction, but also reduces the machine's vibration and operating noise, thereby helping reduce operator fatigue.
- The machine head is provided with a semi-dry head to eliminate staining with oil from the frame (the needle bar part).
(APW-896) In addition to the APW-895's functions, the APW-896 supports the sewing of slanted pockets (for sewing slanted flaps). The world's first computer-controlled sidewise cutting position of the corner knives enables easy adjustments of the knives simply by operating the panel.
|Sewing speed||Max. 3,000sti/min (1,000?3,000sti/min)|
|Kind of welts||Parallel double welt, parallel single welt (with/without flaps)||Parallel double welt, parallel single welt, slanted double welt, slanted single welt,trapezoidal sewing (with/without flaps)|
|Stitch length (fastening stitching)||Condensation stitching: Standard 1.0mm (0.5?1.5mm) Back-tack stitching: Standard 2.0mm (0.5?3.0mm) * Changeable between condensation / back-tack stitching|
|Sewing length (welt length)||Min. 18mm?Max. 220mm (settable in increments of 0.1mm) * The minimum sewing size when the corner knives and the center knife are used: 35mm (or 21mm when a solenoid valve is added) * For a needle gauge width of 14mm or more, the minimum sewing length is 50mm.||Min. 18mm?Max. 220mm (settable in increments of 0.1mm) * The minimum sewing size when the corner knives and the center knife are used: 21mm * For a needle gauge width of 14mm or more, the minimum sewing length is 50mm.|
|Corner-knife cutting adjusting method||Mechanical adjustment||Electronic adjustment|
|Needle gauge||8, 10, 12, 14, 16, 18, 20mm|
|Needle||ORGAN DP |