Tajima – TMBR-SC1801
DCP is an abbreviation for "Digitally Controlled Presser Foot." The machine can embroider on very thin to thick material or seamed sections without fluttering. DCP keeps embroidery quality high while reducing broken needles, thread breakage, skip stitching, etc.Is your shop networked?
The Tajima TMBR Series can easily receive embroidery data by connecting the embroidery software to a network. Autograph and DL/ML are recommended as this software simplifies the process of personalization and allows for the smoothest design data generation and transmission to the machine.Fine Stitch Mode
Fine Stitch (FS) is a special mode that provides stability and creates a high quality of embroidery that makes it easy to sew with hard-to-embroider threads. FS Mode improves the quality of embroidery created with thick thread or soft-twisted thread like metallic and heavier yarns that are difficult to use with the normal machine settings. As a standard part of the TMB machine firmware, FS mode can be turned on with an easy settings change.
|Size (Hoop sizes rounded for IN)||QTY||Description|
|12 CM / 4.75 IN||2||Round Hoop|
|15 CM / 5.90 IN||2||Round Hoop|
|18 CM / 7.10 IN||2||Round Hoop|
|338 MM x 338 MM / 13.3 IN x 13.3 IN||2||Square Hoop|
|410 MM(h) x 555 MM(w) / 16.1 IN(h) x 21.8 IN(w)||2||Large Hoop|
|75 MM(h) x 360 MM(w) / 3 IN(h) x 14.2 IN(w)||2||270° Cap Frame|