Siser CAD Flex - 30% off at checkout

As low as CA$41.50

NOW 30% AT CHECKOUT

WHILE SUPPLIES LAST!

CADflex is a heat transfer vinyl with a non-stick carrier that makes it perfect for stocking up and storing athletic names, numbers, and team logos. Prepare your team sets ahead of time by cutting multiple numbers and team logos and store them for quick use. CADflex is perfect for all sports including soccer, football, baseball, softball and more! Looking for an inexpensive way to add player numbers to leather shoes? CADflex is the answer! By using a shoe platen on your heat press, or a household iron, you can easily apply player numbers and give your team’s shoes a look that stands out!

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Specifications:

PVC Composition
Pressure sensitive backing
Semi-gloss finish
175 Microns/6.8 Mils
45°/60° blade
Can not be layered

Application instructions (heat press)

Cut in reverse
Weed excess material
Preheat garment for 2-3 seconds
Apply design at 305°F/150°C
Use medium/firm pressure for 15 seconds
Peel carrier hot or cold

Application instructions (home iron)

Set iron dial between Cotton and Linen
Cover design with Kraft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for 10-15 seconds
If areas of design lift after application, replace cover sheet and re-press for 10 seconds
Peel carrier hot or cold

CADflex Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

Laundering:

Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean