Vastex
Little Red X2D Mid-Level Infrared Dryer
Little Red X2D Mid-Level Infrared Dryer - 30 Inch Belt / 240V / 1 Phase
SKU:
For Plastisol, Water-Based, Discharge and DTG Digital White Ink, and/or DTF adhesives
The LittleRed® X2D features radically new heat mapping that speeds the curing of ink jet, water-based and discharge inks, as well as DTG-digital inks, plastisol and/or DTF adhesives, making the X2D an unbeatable value for smaller shops. The modular design allows for expandability to easily add chambers and conveyor length as production needs increase.
The X2D model comes with a high powered pre-heating zone that surges ink temperatures to over 300°F (149°C) within the first several inches of conveyor travel inside the 27 in. (69 cm) heating chamber. Two closely spaced, height adjustable infrared heaters and dual zone heat controls maintain consistent temperatures needed for DTG and all other inks. Rapid preheating maximizes the dwell time for each kind of ink, allowing increased conveyor belt speeds and dryer output.
This model comes with a powered exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as to cool the skin and controls.
The conveyor length is 66 in. (168 cm), with a low friction belt aligner and belt speed controls to precisely set dwell times from 35 seconds up to four minutes.
The heaters of all Vastex dryers carry an industry-leading 15-year warranty, and feature closely spaced coils to provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under curing associated with conventional units.
All Little Red series dryers have a tilting heater design. Works great for curing hats.
Product Resources
Features And Highlights
-
FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time
-
POWERFUL
240V/6,300 total wattage
-
DEPENDABLE
Industry-leading 15-year heater warranty
-
EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
-
CONSISTENT
Low friction belt aligner and DC belt speed control with digital display
-
FAST
• 240+ garments/hr for plastisol inks
• 90+ garments/hr for water-based or discharge inks
• 26+ garments/hr for DTG digital white ink @ 3.5 minutes -
HEAVY DUTY
"X-Series" Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor
-
ACCURATE
Dual digital PID temperature controller is accurate to +/-1 °F
-
ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater
-
EXPANDABLE
Add additional chambers belt extensions
-
EXHAUST
High powered exhaust to remove fumes and moisture
Add On Options
To add additional options, our service team will contact you after purchase to assist in fully customizing your dryer.
• Additional heating chambers and conveyor belt extensions
• Locking casters for easy mobility
• Creeper gear
• Donut Probe
Modular Expandability Allows Your Dryer to Grow With You
The capacity (belt speed) of all Vastex floor standing conveyor dryers can be doubled or tripled as new or when needs increase by simply adding one or two modular heating chambers and extending the conveyor belt. This eliminates the need to invest in a larger dryer than you need at the onset, and avoids the high cost of purchasing a new dryer when your needs increase.
Additional Information
| LR-X2D-30 | 1 Row |
| Plastisol @ 25 secs.** | 240+/hr |
| Water Based/Discharge @ 50 secs. ** | 122+/hr |
| Digital White Ink @ 3 min. ** | 34+/hr |
Model X2D-30 has a 30 in. (76 cm) wide belt, two 24 in. (61 cm) wide infrared heaters (6300W @ 240V total wattage), and cures up to 240+ garments per hour with plastisol inks, up to 122+ garments per hour with water-based inks, and up to 34 garments per hour with DTG/digital white ink at 3 minutes dwell time.*
| LR-X1D-18 | LR-X1D-30 | LR-X1D-54 | LR-X2D-30 | LR-X3D-30 | LR-X3D-54 | LR-X3D-78 | |
| Heater Warranty | 15 Year | 15 Year | 15 Year | 15 Year | 15 Year | 15 Year | 15 Year |
| Defect Warranty | 3 Year | 3 Year | 3 Year | 3 Year | 3 Year | 3 Year | 3 Year |
| Shirts / Hr* Plastisol @ 25 secs |
162+ | 162+ | 324+ | 240+ | 360+ | 720+ | 1,080+ |
| Shirts / Hr* - Waterbased/ Discharge | 81+ | 81+ | 162+ | 122+ | 185+ | 370+ | 370+ |
| Shirts/hr* - DTG/digital | 34 @ 2 min. 27 @ 2.5 min. 23 @ 3 min. |
34 @ 2 min. 27 @ 2.5 min. 23 @ 3 min. |
68 @ 2 min. 54 @ 2.5 min. 46 @ 3 min. |
51 @ 2 min. 40 @ 2.5 min. 34 @ 3 min. |
77 @ 2 min. 61 @ 2.5 min. 51 @ 3 min. |
154 @ 2 min. 123 @ 2.5 min. 103 @ 3 min. |
231 @ 2 min. 185 @ 2.5 min. 155 @ 3 min. |
| Time in Tunnel Range (mm:ss) | 00:21 - 03:07 | 00:21 - 03:07 | 00:23 - 03:19 | 00:31 - 04:40 | 00:22 - 03:10 | 00:22 - 03:10 | 00:22 - 03:10 |
| Belt Speed | 0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
0.7 - 9.3 FPM* (0.2 - 2.8 MPM) |
| Exhaust (Free Air) | 177 CFM (5 CMM) | 280 CFM (7.9 CMM) | 280 CFM (7.9 CMM) | 280 CFM (7.9 CMM) | 388 CFM (11 CMM) | 550 CFM (15.6 CMM) | 1,100 CFM (31.2 CMM) |
| Exhaust Stack Diameter | 4” (10.16 cm) | 6” (15.24 cm) | 6” (15.24 cm) | 6” (15.24 cm) | 8” (20.32 cm) | 8” (20.32 cm) | 8” (20.32 cm) |
| Overall Length | 48” (122 cm) | 48” (122 cm) | 66” (168 cm) | 66” (168 cm) | 88” (224 cm) | 88” (224 cm) | 102” (260 cm) |
| Overall Width | 30” (76 cm) | 41" (105 cm) | 65" (166 cm) | 41" (105 cm) | 41" (105 cm) | 65" (166 cm) | 89” (226 cm) |
| Overall Height | 50” (127 cm | 50” (127 cm | 50” (127 cm | 50” (127 cm | 50” (127 cm | 50” (127 cm | 54” (137 cm) |
| Belt Width | 18” (46 cm) | 30” (76cm) | 54” (137cm) | 30” (76cm) | 30” (76cm) | 54” (137cm) | 78” (198 cm) |
| Chamber Length | 18” (46 cm) | 18” (46 cm) | 18” (46 cm) | 27”(69cm) | 41”(104cm) | 41”(104cm) | 41”(104cm) |
| Chamber Infeed Width | 21” (53 cm) | 33.5" (85 cm) | 33.5" (85 cm) | 33.5" (85 cm) | 33.5" (85 cm) | 57.5" (146 cm) | 81.5” (207 cm) |
| Chamber Infeed Height (adjustable) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) |
| Heat Range (@ Heater) | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-800F° (0-427C°) @ 240V 0-900F° (482C°) - booster | 0-800F° (0-427C°) @ 240V 0-900F° (482C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster | 0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster |
| Heater Size & Standard Wattage** |
16” x 18” (40 x 45 cm)
1,860 Watts Total (1.86kW) |
16” x 24” (40 x 61 cm)
4,050 Watts Total (4.05kW) |
16” x 48” (40 x 122 cm)
8,100 Watts Total (8.1kW) |
12" x 24" (30 x 61 cm)
6,300 Watts Total (6.3kW) |
12" x 24" (30 x 61 cm)
8,900 Watts Total (8.9kW) |
12" x 48” (30 x 122 cm)
17,800 Watts Total (17.8kW) |
12" x 48” (30 x 122 cm)
26,700 Watts Total (26.7kW) |
| Cost / hour to operate based on 10 cents / kwh |
19 cents | 41 cents | 81 cents | 63 cents | 89 cents | $1.78 | $2.67 |
| Unit Weight | 172 lbs (78 kg) | 220 lbs (100 kg) | 380 lbs (173 kg) | 304 lbs (137.9 kb) | 424 lbs (193 kg) | 636 lbs (289 kg) | 850 lbs (385.6 kg) |
| Electrical Specs** Chamber | 240V / 10A / 1 Ph. / NEMA 6-15P | 240V / 16A / 1 Ph. / NEMA 6-20P | 240V / 32A / 1 Ph. / 3 wire 50/60HZ | 240V / 30A / 1 Ph. / 3 wire 50/60HZ | 240V / 42A / 1 Ph. / 3 wire 50/60HZ | 240V / 83A / 1 Ph. / 3 wire 50/60HZ | 240V / 73A / 3 Ph. / 4 wire 50/60HZ |
| Electrical Connection | Cordset Included | Cordset Included | All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code. | ||||
| Optional Power | 208V / 14.5A / 1 Ph. / NEMA 6-20P | 400V / 8A / 3 Ph. / 5 wire 50/60HZ | 400V / 14A / 3 Ph. / 5 wire 50/60HZ | 400V / 11A / 3 Ph. / 5 wire 50/60HZ | 240V / 24A / 3 Ph. / 4 wire 50/60HZ 400V / 15A / 3 Ph. / 5 wire 50/60HZ |
240V / 45A / 3 Ph. / 4 wire 50/60HZ 400V / 30A / 3 Ph. / 5 wire 50/60HZ |
400V / 46A / 3 Ph. / 5 wire 50/60HZ |
*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.
All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
This dryer does not come with a plug. A plug will need to be added to the supplied pigtail, or the machine will need to be wired direct. We recommend speaking with an electrician if you have any questions.
Is the Little Red X2D Mid-Level Infrared Dryer right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the Little Red X2D Mid-Level Infrared Dryer to your apparel decorating business.