M&R

SKU:

Financing Options

The M&R QUATRO Direct to Film (DTF) Transfer Printing System is a modern and efficient method of applying vibrant, high-quality durable images onto a wide variety of garments, and fabric types.

The DTF process begins with the creation of a digital design on a computer. Once the design is finalized, it is printed onto a special PET film with a specialized digital inkjet printer using Cyan, Magenta, Yellow, Black and White pigmented aqueous inkjet inks. After printing is complete, and while the ink is still wet, the transfer is prepared by applying a layer of adhesive to the print area.

Immediately after the adhesive has been applied, the final construction of film, ink, and adhesive is prepared for the transfer process by running it through a high efficiency infra-red drying system to cure the ink, and to fuse the adhesive to achieve a strong bond between the ink and the fabric, ensuring a durable and long-lasting print.

The garment is placed on a heat press and lightly pressed to remove excess moisture and to ensure that the fabric is transfer receptive. The film transfer is then laid on top of the garment in the correct alignment. The heat press is used to apply both heat and pressure, which activates the adhesive and causes the design to transfer from the film onto the fabric. The heat and pressure also ensure that the ink penetrates deeply into the fabric fibers, resulting in vibrant and vivid colors.

The M&R QUATRO 60 cm (24”) High-Resolution Industrial Inkjet Printer comes with a PC workstation with intuitive Graphic User Interface (GUI) and QUATRO HP RIP software - powered by CALDERA; four Epson i3200 print heads: two CMYK and two White; and a bulk ink system with white ink recirculation.

The M&R QUATRO Combination Adhesive Application System and Quartz Infrared Dryer includes an on-board bulk powder adhesive reservoir to promote continuous system operation; two base-mounted trays to capture excess powder adhesive for reuse; an Integrated exhaust filtration system; continuous temperature monitoring, and M&R’s “Positive Link System” to ensure accurate film tracking between the QUATRO printer, powder applicator and dryer.

A QUATRO system purchase includes three days of operator and maintenance training for two employees at M&R’s Roselle, IL SM&RT Academy; ongoing VIP access to M&R’s online Learning Management System (LMS) video support library and M&R 24/7/365 technical support hotline; and a startup consumables kit and a maintenance kit.
View full details

Features And Highlights

 

  • Vibrant, high-quality prints with excellent color accuracy and sharp details
  • Compatible with a wide range of fabrics, including cotton, polyester, blends, spandex and nylon
  • Requires less than 200 ft² of production space with only a single operator needed

  

Additional Information

INK SYSTEM
  • Utilizes Cyan, Magenta, Yellow, Black and White inks
  • White Ink Auto Circulation Supply System
 
PRINTHEADS
  • Four Epson I3200 A1 Print Heads: two CMYK, two White
 
RESOLUTION
  • 320 x 2400 DPI, 4-Pass, 120 Linear Feet/Hour

  • 720 x 1800 DPI, 6-Pass, 90 Linear Feet/Hour

  • 720 x 2400 DPI, 8-Pass, 60 Linear Feet/Hour

 
WARRANTY, SERVICE AND SUPPORT
  • 24-hour hotline is staffed 365 days a year
Dimensions (L x W x H) 76.2 x 182.88 x 144.78 cm (30" x 72" x 57") (printer)
187.96 x 109.22 x 106.68 cm (74" x 43" x 42") (dryer)
Electrical Requirements 208/230 V, 1 ph, 34 A, 50/60 Hz, 8 kW
Humidity 40% – 60%
Ink System White Ink Auto Circulation Supply System
Ink Type Eco-Friendly Water Based Ink
Interface Computer and Operating Software Included
Media Transmission Automatic Roll Out and Film Take Up
Operating Temperature 60º – 80ºF (15.6 – 26.7°C)
Print Media M&R QUATRO DTF 24" PET Transfer Film (23.8" W x 328' L)
Printheads Four Epson i3200 print heads: two CMYK and two White
Resolution • 320 x 2400 DPI, 4-Pass, 120 Linear Feet/Hour
• 720 x 1800 DPI, 6-Pass, 90 Linear Feet/Hour
• 720 x 2400 DPI, 8-Pass, 60 Linear Feet/Hour
RIP Software QUATRO HP RIP - powered by CALDERA
Shipping Weight 788 lb. (printer)
1106 lb. (dryer)
Working Area Allocation 304.8 x 243.84 cm (10' x 8') (minimum)
365.76 x 304.8 cm (12' x 10') (recommended)

Is the M&R QUATRO DTF Printing System right for you?

Enter your info below and a RB Digital sales representative will contact you about adding the M&R QUATRO DTF Printing System to your apparel decorating business.